EMPCB.MMCXFSTJ.A.HT Datasheet, PDF (2/3 Pages) Taoglas antenna solutions – rohs compliant

1. Introduction
The EMPCB.MMCXFSTJ.A.HT connector was designed to be mounted on a PCB edge. The edge
mount configuration allows the connector to be easily slotted onto a PCB board; the maximum
thickness of PCB that the connector can be used with is 0.8mm. The connector pin is directly
soldered onto pads on the PCB. Taoglas connectors are all RoHS compliant.
2. Specification
Impedance
Frequency Range
Working Voltage
Dielectric withstanding Voltage
Insulation Resistance
Connector Dimension
Max. Thickness PCB acceptable
Connector Pin Diameter
Connector Type
Operating Temperature
ELECTRICAL
50Ω
DC~6 GHz
Max. ≤170 Vrms
500 Vrms
≥1000M ohms
MECHANICAL
7.4mm*4.5 mm
0.8mm
0.7mm
MMCX(F) to PCB Edge Mounted
ENVIRONMENTAL
-45°C to +85°C
RoHS compliant
SPE-12-8-135/B/WY
Page 2 of 3