CBD01070100C Datasheet, PDF (12/19 Pages) Taoglas antenna solutions – 2.4GHz Cable Dipole Antenna

6. Installation
2.4GHz remote control receivers usually need two separate 2.4GHz receiver antennas
for receive diversity.
* 2.4GHz remote control receivers + 2.4GHz receiver antennas
The user connects the two CBD.01 antennas to a 2.4GHz remote control receiver. The
two antennas should be placed at 90 degrees to each other. They should be kept as
straight as possible but also kept away from each other as much as possible. If not,
effective range could be reduced.
Our antennas should be placed at both sides of the 2.4G remote receiver. Then the
best RF signal condition can be obtained at any flying attitude. The antennas must be
kept 15mm away from metal materials.
SPE-16-8-002/A/SS
Page 12 of 19