W83L771ASG Datasheet, PDF (27/28 Pages) Nuvotem Talema – W83L771AWG W83L771ASG Nuvoton H/W Monitoring IC

W83L771AWG/W83L771ASG
12. REVISION HISTORY
VERSION
DATE
1.0
01/28/2008
1.1
03/04/2008
1.2
03/25/2008
1.3
01/15/2009
1.4
02/03/2009
1.5
03/06/2009
1.6
04/15/2009
1.7
06/18/2009
1.8
10/7/2009
1.9
10/21/2009
1.91
11/19/2009
PAGE
20
3, 5, 6, 8, 9, 10,
15, 17, 20
17-19
1,15,19,22
3
3
3,19
2
9,10,13
20
21
DESCRIPTION
The versions before 1.0 are preliminary
version
Remove section 8.9 Configuration on Beta
Compensation Technology.
1. Modify Chapter 4 Block Diagram.
2. Add the descriptions of “POWER” and
“GROUND” to Chapter 6 Pin Descriptions.
3. Correct the description and update
“ALERT protocol” to “ALERT mode” in
section 7.1 General Description.
4. Update the descriptions in 7.3.2
ALERT Output Interrupt Mode.
5. Update Figure 7.3.1, Figure 7.3.2, Figure
7.3.3, Figure 7.4, and Figure 7.6.1.
6. Update “RDTF1” to “RDTF”, remove
“Remote Diode Ideality Low Byte”, and
correct the default of “Remote Diode
Ideality” in section 8.1
W83L771AWG/ASG Registers.
7. Update the information in section 9.1
Absolute Maximum Ratings.
8. Modify the description of bit D2 of 8.3
Status Register.
1. Add the power-on default states, read
address, and write address of registers
1. Modified the typo of Ideality CR[E3h]
default value.
2. Added W83L771AWG-2/ASG-2 info.
1. Modified the remote temperature
accuracy range.
1. Added maximum accuracy range
definition.
1. Modified the operation temperature range
definition.
Added processor type support description.
1. Added APN reference description.
2. Added application notice for T_CRIT#.
1. Modified the AC characteristic to support
400KHz serial bus.
1. Correct the top marking
- 24 -
Publication Release Date: 2009/11/19
Version: 1.91