MMJ-100B-501 Datasheet, PDF (1/2 Pages) Nuvotem Talema – Miniature SMD Interface Modules

ISDN S_O Miniature SMD Interface Modules
Features
• excellent output characteristics ensures compliance with
CCITT.I.430 pulse waveform template when used with
recommended IC pairing
• SMD modules are designed for pick and place compatibility
• excellent and consistent balance between windings
• manufactured in ISO-9001:2000, TS-16949:2002 and
ISO-14001:2004 certified Talema facility
• meets lead free reflow level J-STD-020C
• fully RoHS compliant
• operating temperature: -40° to +85°C
• storage temperature: -40° to +125°C
Electrical Specifications @ 25°C
Turns Ratio: Bold = IC side windings
Miniature Chip SMD Modules comply with EN60950, UL1950 and UL1459
Part Number
L_P
(mH Min)
MMJ-100B-501
25
Turns
Ratio
1:1:1:1
L_L
C_C
R_CUP
(µH Max) (pF Max) (Ohms)
5
50
2.6
R_CUS
(Ohms)
2.7
Quad Choke
(per winding)
R_CU (Ohms)
0.30
L
500µH
V_P
Schematic
(Vrms)
1500
B
Test Conditions:
Polarity and Turns Ratio: ±1%
Inductance: 25mH minimum, line side windings in series @ 10kHz, 100mV
Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mV
Coupling capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV
Common Mode Choke Inductance: 100kHz, 20mV
Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series
Standard Packaging: Tape and Reel
MMJ Miniature Module
0.378 0.346
(9.60) (8.80)
TALEMA IN
WK/YR
Part Number
0.051
(1.31)
0.350
(8.89)
0.453
(11.50)
0.256 ^0.216
(6.50) ^(5.50)
Pins: 0.016 x 0.016
(0.40 x 0.40)
Surface Coplanarity will be 0.004 (0.10)
Suggested
Pad Layout
0.050
(1.27)
0.030
(0.75)
0.394
(10.60)
0.079
(2.00)
0.350
(8.89)
Schematic
B
Line
IC
5
10
7
12
9
4
11
8
3
15
1
13
16
6
14
2
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
(08-06) Communications\ISDN\MMJ