|
JMK316BJ226KL-T Datasheet, PDF (42/48 Pages) Taiyo Yuden (U.S.A.), Inc – Please read this notice before using the TAIYO YUDEN products | |||
|
◁ |
9. Deflection
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
: No abnormality
: Within±10%
Warp
Duration
Test board
Thickness
: 1mm
: 10sec.
: Glass epoxy-resin substrate
: 1.6mm
Capacitance measurement shall be conducted with the board bent.
10. Adhesive Strength of Terminal Electrodes
Specified Value No terminal separation or its indication.
Test Methods and
Remarks
Applied force
Duration
: 5N
: 30±5sec.
11. Solderability
Specified Value
Test Methods and
Remarks
At least 95% of terminal electrode is covered by new solder
Solder type
Solder temperature
Duration
Eutectic solder
H60A or H63A
230±5â
4±1 sec.
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3â
12. Resistance to Soldering
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
Test Methods and
Remarks
Preconditioning
Solder temperature
Duration
Preheating conditions
Recovery
: No abnormality
: Within±15%ï¼HMKï¼, ±10%ï¼QMK, SMKï¼
: Initial value
: Initial value
ï¼between terminalsï¼ : No abnormality
: Thermal treatmentï¼at 150â for 1hrï¼ Note1
: 270±5â
: 3±0.5sec.
: 80 to 100â, 2 to 5 min.
150 to 200â, 2 to 5min.
: 24±2hrs under the standard condition Note3
13. Temperature Cycle ï¼Thermal Shockï¼
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%ï¼HMKï¼, ±7.5%ï¼QMK, SMKï¼
: Initial value
: Initial value
Test Methods and
Remarks
Preconditioning : Thermal treatment ï¼at 150â for 1hrï¼ Note1
Conditions for 1 cycle
Step
Temperatureï¼âï¼
1
Minimum operating temperature
2
Normal temperature
3
Maximum operating temperature
4
Normal temperature
Number of cycles : 5 times
Recovery : 24±2hrs under the standard condition Note3
Timeï¼min.ï¼
30±3min.
2 to 3min.
30±3min.
2 to 3min.
ⶠThis catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E02R01
|
▷ |