|
PAS2126FR2R5504 Datasheet, PDF (3/3 Pages) Taiyo Yuden (U.S.A.), Inc – THIN FILM TYPE PAS CAPACITOR | |||
|
◁ |
â RELIABILITY DATA
Items
Speciï¬cations
Test Conditions, Remark
1. Operating Temperature range
ï¼25ï½ï¼60â
2. Max. Usable Voltage
2.5V
Capacitanceï¼Fï¼ï¼0.28ï½ 0.6
3. Floating Charge Characteristics Internal Resistanceï¼mΩï¼ï¼Under 120
Appearanceï¼No leakage/Thickness within 1.1mm
Apply the max. Usable voltage to the capacitors for 500hours at max. operating
temp. and measure the ï¬oating charge characteristics after returning to normal
temperature and humidity.
4. Charge/Discharge Cycle
Characteristics
Capacitanceï¼Fï¼ï¼0.28ï½0.6
InternalãResistanceï¼mΩï¼ï¼Under 120
Appearanceï¼No leakage/Thickness within 1.1mm
Temperatureï¼25±5â
Charge/Discharge Cycleï¼10,000times
Cycle Condition
Chargeï¼2.5V-5secãMAX 1A
Dischargeï¼c1Aã(Cutoffã1.5V)
5. Thermal Durability
Capacitanceï¼Fï¼ï¼0.4ï½ 0.6
Internal Resistanceï¼mΩï¼ï¼Under 96
Appearance ï¼No leakage/Thickness within 1.1mm
Leave in the atmosphere of 60±2â and ï¼25â±2â for 96 hours each and re-
turn to normal temp. and pressure.
6. Humidity Durability
Capacitanceï¼Fï¼ï¼0.4ï½ 0.6
Internal Resistanceï¼mΩï¼ï¼Under 96
Appearance ï¼No leakage/Thickness within 1mm
Leave in the atmosphere of temp. 40±2 â humidity 90ï½95 ï¼
RH for 500h and
return to normal temperature.
7. Solder Heat Resistance
Capacitance
: Within 0.4ï½0.6F
Internal Resistance : Within 2 times of initial spec.
Appearance
: No leakage/Thickness within 1.1mm
Manual Soldering : Heating condition :
normal temp. and pressure.
After 380 â Ã10secÃ2times, return to
â PRECAUTIONS
1. Use under the maximum usable voltage.
When voltage which exceed the maximum usable voltage is applied, it might
cause abnormal current ï¬ow, which shorten lifetime, and leakage , and sometimes
damages PAS capacitors.
2. Use under maximum operating temperature.
A capacitor using in over max operating temperature may lead to shorter life, leak-
age, and electrical damage by increasing internal pressure.
3. Limited life time.
Lifetime of PAS capacitor is greatly affected by surrounding temperature. 10â
drop in temperature extends its expected lifetime approximately twice as much.
Design a circuit under consideration of deterioration of electrical characteristics
after long time usage, decreasing in capacitance and increasing in internal resis-
tance.
4. PAS capacitor's electrical characteristics might change depending on the sur-
rounding temperature.
PAS Capacitorâs electrical characteristics might change depending on the sur-
rounding temperature aside from aged deterioration.
Therefore, be sure to conï¬rm the temperature performance before use product.
5. PAS capacitor has polarity.
PAS capacitor has polarity. Please check the polarity before use.
If a reverse voltage is applied, causing damage to the product.
6. Mind voltage drop when back-up.
When back-up (discharging) starts, voltage will drop because of active current and
internal resistance.
7. Environment of usage .
In case PAS capacitor is used in high humidity, alkaline or acid air, it may cause
deteriorating of its performance and short circuit by corrosion of outer can or lead
terminal. In addition, used in sudden temperature change or high humidity, it may
cause deteriorating of its performance and electrolyte leak by dew condensation.
8. Donât apply shock and vibration or pressure.
PAS capacitor is sensitive to shock. Donât drop PAS capacitor and not apply
strong pressure to a body, terminals and lead. Soldering part or lead terminal
might be damaged if applying vibration, shock and stress such as pinch, tip, push
and twist after installed.
9. Soldering
If next each item is not minded, it may cause deteriorating of its performance,
leakage, shortening lifetime.
Donât solder over solder conditions in the spec. sheet.
10. Cleaning condition when cleaning circuit-board after soldering.
Cleaning may affect PAS capacitor. Consult us about cleaning conditions beforehand.
Some cleaning conditions cause detrimental inï¬uence.
11. Storage.
Keep following cautions for storage of PAS capacitor.
⦠Donât store in the high temperature, the high humidity condition and a place
where receiving direct sunlight. Storing PAS capacitor in the room condition of
10â - 35â and less than 65% relative humidity is recommended. Sudden tem-
perature change or high humidity may cause deteriorating of its characteristics
and Soldering.
⦠Donât store PAS capacitor near water, salt water or oil, and it the dew conden-
sation, gasiï¬ed oil or salinity ï¬lled place.
⦠Donât store PAS capacitor in the hazardous gas (hydrogen sulï¬de, sulfurous,
chlorine , ammonia, bromine, methyl bromine and etc).
⦠Donât fumigate by halogen fumigant.
⦠Donât store PAS capacitor near acid or alkaline solvent.
⦠Donât store PAS capacitor in a place where exposed to ozone, ultraviolet or
x-ray.
⦠Donât store PAS capacitor in a place where vibration and shock might occur in.
ï¼ This catalog contains the typical speciï¬cation only due to the limitation of space. When you consider the purchase of our products, please check our speciï¬cation.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
cap05_reli-PRP1
cap05_reli_e-01
|