PAS0815LR2R3105 Datasheet, PDF (3/4 Pages) Taiyo Yuden (U.S.A.), Inc – CYLINDER TYPE PAS CAPACITOR

■ PACKAGING
①Minimum Packing Unit (Plastic Bag)
Item
Minimum
Packing
Unit
Standard Inner
Packing Box
quantity
PAS0815 200
10bags 2000
PAS1016 200
10bags 2000
250
PAS1020 100
15bags 1500
PAS1220 100
10bags 1000
PAS1235 50
10bags 500
PAS1840 10
20bags 200
180
Standard Inner Packing Box
200mm(W)×330mm(L)×140mm(H)
■ RELIABILITY DATA
Items
LR Series
Specifications
LA Series
1. Operating Temperature range
－25～＋60℃
2. Max. Usable Voltage
2.3V
2.3V
3.0V
Capacitance
: Over 70% of initial spec.
3. Floating Charge Characteristics Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
4. Charge/Discharge Cycle
Characteristics
Capacitance
: Over 70% of initial spec.
Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
5. Thermal Durability
Capacitance
: Within initial spec.
Internal Resistance : Within initial spec.
Appearance
: No noticeable abnormality
6. Humidity Durability
Capacitance
: Within initial spec.
Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
7. Impact Durability
No exterior abnormality observed :
initial spec. values retained
8. Vibration Durability
No exterior abnormality observed :
initial spec. values retained
9. Solder Heat Resistance
Capacitance
: Within initial spec.
Internal Resistance : Within initial spec.
Appearance
: No noticeable abnormality
Test Conditions, Remark
Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp.
and measure the floating charge characteristics after returning to normal tem-
perature and humidity.
Measure the charge/discharge cycle characteristics after 10000 charge/discharge
cycle at 25±5℃ with under mentioned charge/discharge cycle test condition for
each parts.
Leave the capacitor in an atmosphere of 60℃±2℃ and ー25±2℃ consecutively
for 96 hours each, and return to normal temperature and humidity.
Temperature : 40±2℃, Humidity : 90～95%RH Leave the capacitor for 500 hours,
and return to normal temperature and humidity.
Accorging to JIS C 0041
Sine half wave A=294
Apply a sine wave vibration of 1.5mm amplitude and frequency 10～55Hz,
for 2 hours per each direction (X, Y and Z), total 6 hours.
Material
: Sn-3Ag-0.5Cu
Solder bath temperature : 260±5℃
Dipping time : 10±1 sec.
Dipping depth : 1.5～2mm from cell body
◦Charge/Discharge Cycle Test Condition
Part Number
Charging Voltage (V)
PAS0815
LR2R3105
2.3
Charging Time (s)
10
Max. Charging Current (A)
1
Discharging Current (A)
1
Cut off Voltage (V)
1.5
PAS1016
LR2R3205
2.3
10
1
1
1.5
PAS0815
LA2R3185
2.3
10
1
1
1.5
PAS1020
LA2R3475
2.3
10
1
1
1.5
PAS1220
LA2R3106
2.3
10
1
1
1.5
PAS1235
LA2R3226
2.3
10
1
1
1.5
PAS1840
LA2R3566
2.3
30
5
5
1.5
PAS1020
LA3R0405
3.0
30
2
0.5
1.5
PAS1220
LA3R0905
3.0
30
3
1.0
1.5
PAS1235
LA3R0206
3.0
30
5
1
1.5
PAS1840
LA3R0506
3.0
30
10
2
1.5
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
cap02_reli-RP1

cap02_reli_e-01