NS12575T102MN Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors (NS series)

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/12/1
SMD Power Inductors (NS series)
NS12575T102MN
Dimension
Length :
Width :
Height :
unit : mm
12.5 + / - 0.3
12.5 + / - 0.3
7.5 + / - 0.35
unit : inch
( 0.492 + / - 0.012 )
( 0.492 + / - 0.012 )
( 0.295 + / - 0.014 )
Inductance : 1000
uH ( test freq at 0.1MHz )
DC Resistance : 0.927 / 1.1124 ohm ( typ / max )
Saturation Current : 0.80 A ( max )
Temp. rise Current : 0.68 A ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
DC Bias vs Inductance
1500
1000
500
0
0
400 800 1200 1600 2000
DC Bias [mA]
60
50
40
30
20
10
0
0
DC Bias vs Temperature
200 400 600 800 1000
DC Bias [mA]
Frequency vs Inductance
100000
10000
1000
100
0.1
1
10
100
1000
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.