NS10165T2R2NNA Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/12/1
SMD Power Inductors (NS series)
NS10165T2R2NNA
Dimension
Length :
Width :
Height :
unit : mm
10.1 + / - 0.3
10.1 + / - 0.3
6.5 + / - 0.35
unit : inch
( 0.398 + / - 0.012 )
( 0.398 + / - 0.012 )
( 0.256 + / - 0.014 )
Inductance : 2.2
uH ( test freq at 0.1MHz )
DC Resistance : 0.0074 / 0.00888 ohm ( typ / max )
Saturation Current : 10.80 A ( max )
Temp. rise Current : 7.32 A ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
DC Bias vs Inductance
5
4
3
2
1
0
0
4000 8000 12000 16000 20000
DC Bias [mA]
60
50
40
30
20
10
0
0
DC Bias vs Temperature
2000
4000 6000 8000 10000
DC Bias [mA]
Frequency vs Inductance
100
10
1
0.1
0.1
1
10
100
1000
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.