NS10145T330MNA Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/12/8
SMD Power Inductors (NS series)
NS10145T330MNA
Dimension
Length :
Width :
Height :
unit : mm
10.1 + / - 0.3
10.1 + / - 0.3
4.5 + / - 0.35
unit : inch
( 0.398 + / - 0.012 )
( 0.398 + / - 0.012 )
( 0.177 + / - 0.014 )
Inductance : 33
uH ( test freq at 0.1MHz )
DC Resistance : 0.0815 / 0.0978 ohm ( typ / max )
Saturation Current : 2.36 A ( max )
Temp. rise Current : 2.01 A ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
50
40
30
20
10
0
0
DC Bias vs Inductance
1000
2000 3000 4000
DC Bias [mA]
5000
60
50
40
30
20
10
0
0
DC Bias vs Temperature
600 1200 1800 2400 3000
DC Bias [mA]
Frequency vs Inductance
1000
100
10
1
0.1
1
10
100
1000
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.