NS10145T151MNA Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/12/8
SMD Power Inductors (NS series)
NS10145T151MNA
Dimension
Length :
Width :
Height :
unit : mm
10.1 + / - 0.3
10.1 + / - 0.3
4.5 + / - 0.35
unit : inch
( 0.398 + / - 0.012 )
( 0.398 + / - 0.012 )
( 0.177 + / - 0.014 )
Inductance : 150
uH ( test freq at 0.1MHz )
DC Resistance : 0.341 / 0.4092 ohm ( typ / max )
Saturation Current : 1.11 A ( max )
Temp. rise Current : 0.94 A ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
DC Bias vs Inductance
200
150
100
50
0
0
400 800 1200 1600 2000
DC Bias [mA]
60
50
40
30
20
10
0
0
DC Bias vs Temperature
400 800 1200 1600 2000
DC Bias [mA]
10000
Frequency vs Inductance
1000
100
10
0.1
1
10
100
1000
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.