NRS8030T6R8MJGJV Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors for Automotive

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/11/5
SMD Power Inductors for Industrial / Automotive Comfort and Safety Applications
(NR series S type)(AEC-Q200 qualified)
NRS8030T6R8MJGJV
Dimension
Length :
Width :
Height :
unit : mm
8.0 + / - 0.2
8.0 + / - 0.2
3.0 max.
unit : inch
( 0.315 + / - 0.008 )
( 0.315 + / - 0.008 )
( 0.118
max. )
AEC-Q200 qualified
Inductance : 6.8
uH ( test freq at 0.1MHz )
DC Resistance : 0.029 / 0.0377 ohm ( typ / max )
Saturation Current : 3,000 mA ( max )
Temp. rise Current : 3,400 mA ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
10
8
6
4
2
0
0
DC Bias vs Inductance
2000
4000 6000 8000 10000
DC Bias [mA]
60
50
40
30
20
10
0
0
DC Bias vs Temperature
2000
4000 6000 8000 10000
DC Bias [mA]
Frequency vs Inductance
100
10
1
0.1
0.1
1
10
100
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
The products are tested based on the test conditions and methods defined in AEC-Q200.
Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.