NRS6045T3R0NMGKV Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors for Automotive

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/11/5
SMD Power Inductors for Industrial / Automotive Comfort and Safety Applications
(NR series S type)(AEC-Q200 qualified)
NRS6045T3R0NMGKV
Dimension
Length :
Width :
Height :
unit : mm
6.0 + / - 0.2
6.0 + / - 0.2
4.5 max.
unit : inch
( 0.236 + / - 0.008 )
( 0.236 + / - 0.008 )
( 0.177
max. )
AEC-Q200 qualified
Inductance : 3.0
uH ( test freq at 0.1MHz )
DC Resistance : 0.024 / 0.0312 ohm ( typ / max )
Saturation Current : 5,600 mA ( max )
Temp. rise Current : 3,300 mA ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
DC Bias vs Inductance
5
4
3
2
1
0
0
2000 4000 6000 8000 10000
DC Bias [mA]
60
50
40
30
20
10
0
0
DC Bias vs Temperature
1000
2000 3000 4000
DC Bias [mA]
5000
Frequency vs Inductance
100
10
1
0.1
0.1
1
10
100
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
The products are tested based on the test conditions and methods defined in AEC-Q200.
Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.