NRS6020T0R8NMGGV Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors for Automotive

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/11/5
SMD Power Inductors for Industrial / Automotive Comfort and Safety Applications
(NR series S type)(AEC-Q200 qualified)
NRS6020T0R8NMGGV
Dimension
Length :
Width :
Height :
unit : mm
6.0 + / - 0.2
6.0 + / - 0.2
2.0 max.
unit : inch
( 0.236 + / - 0.008 )
( 0.236 + / - 0.008 )
( 0.079
max. )
AEC-Q200 qualified
Inductance : 0.8
uH ( test freq at 0.1MHz )
DC Resistance : 0.02 / 0.024 ohm ( typ / max )
Saturation Current : 6,400 mA ( max )
Temp. rise Current : 4,100 mA ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
DC Bias vs Inductance
2
1.5
1
0.5
0
0 4000 8000 12000 16000 20000
DC Bias [mA]
60
50
40
30
20
10
0
0
DC Bias vs Temperature
2000
4000 6000 8000 10000
DC Bias [mA]
Frequency vs Inductance
100
10
1
0.1
0.1
1
10
100 1000 10000
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
The products are tested based on the test conditions and methods defined in AEC-Q200.
Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.