NRS6014T3R3NMGGV Datasheet, PDF (2/2 Pages) Taiyo Yuden (U.S.A.), Inc – SMD Power Inductors for Automotive

Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2014/11/5
SMD Power Inductors for Industrial / Automotive Comfort and Safety Applications
(NR series S type)(AEC-Q200 qualified)
NRS6014T3R3NMGGV
Dimension
Length :
Width :
Height :
unit : mm
6.0 + / - 0.2
6.0 + / - 0.2
1.4 max.
unit : inch
( 0.236 + / - 0.008 )
( 0.236 + / - 0.008 )
( 0.055
max. )
AEC-Q200 qualified
Inductance : 3.3
uH ( test freq at 0.1MHz )
DC Resistance : 0.075 / 0.09
ohm ( typ / max )
Saturation Current : 2,500 mA ( max )
Temp. rise Current : 2,000 mA ( max )
Saturation current typical : 30% reduction from initial L value.
Temp rise Current typical : Temperature will rise by 40 deg C
DC Bias vs Inductance
5
4
3
2
1
0
0
1000 2000 3000 4000 5000
DC Bias [mA]
60
50
40
30
20
10
0
0
DC Bias vs Temperature
600 1200 1800 2400 3000
DC Bias [mA]
Frequency vs Inductance
100
10
1
0.1
0.1
1
10
100 1000 10000
Frequency [MHz]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
The products are tested based on the test conditions and methods defined in AEC-Q200.
Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.