LHL08TB471K Datasheet, PDF (15/21 Pages) Taiyo Yuden (U.S.A.), Inc – RADIAL LEADED INDUCTORS

16. DC bias characteristic
CAL45 Type
△L/L : Within －10%
Specified Value LHL□□□
FBA/FBR
Test Methods and
CAL45 Type : Measure inductance with application of rated current using LCR meter to compare it with the initial value.
Remarks
17. Body strength
Specified Value
Test Methods and
Remarks
CAL45 Type
No abnormality as damage.
LHL□□□
FBA/FBR
No abnormality such as cracks on body.
CAL45 Type :
Applied force
Duration
Speed
FBA :
Applied force
Duration
:50N
: 10 sec.
: Shall attain to specified force in 2 sec.
: 50±3N
: 30±1 sec.
18. Resistance to vibration
CAL45 Type
△L/L : Within ±5%
Specified Value
LHL□□□
Appearance : No abnormality
△L/L : Within ±5%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
Appearance : No abnormality
Impedance change : Within ±20%
Test Methods and
Remarks
CAL45 Type :
Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
Frequency range
: 10 to 55 to 10Hz (1min.)
Amplitude
: 1.5mm
Mounting method
: Soldering onto printed board.
Recovery
: At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.
LHL□□□・FBA/FBR :
Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
Frequency range
: 10 to 55 to 10Hz (1min.)
Amplitude
: 1.5mm
Mounting method
: Soldering onto printed board.
19. Resistance to shock
CAL45 Type
Specified Value LHL□□□
FBA/FBR
Test Methods and
Remarks
CAL45 Type :
Drop test
Impact material
Height
Total number of drops
No significant abnormality in appearance
: concrete or vinyl tile
: 1m
: 10 times
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01