|
EMK212BJ106KG-T Datasheet, PDF (13/19 Pages) Taiyo Yuden (U.S.A.), Inc – Please read this notice before using the TAIYO YUDEN products. | |||
|
◁ |
15. Humidity ï¼Steady Stateï¼
Temperature
Compensatingï¼Class1ï¼
Standard
Appearance
Capacitance change
Q
Insulation resistance
: No abnormality
: Within ±5% or ±0.5pF, whichever is larger.
: Cï¼10pF : Qâ§200ï¼10C
10â¦Cï¼30pF : Qâ§275ï¼2.5C
Câ§30pF:Qâ§350ï¼Cï¼Nominal capacitanceï¼
: 1000 MΩ min.
Specified
Value
High Frequency Type
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±0.5pF,
: 1000 MΩ min.
High Permittivity ï¼Class2ï¼ Note 1
Appearance
: No abnormality
Capacitance change : Within ±12.5% ï¼BJ, B7, C6, C7, LD(â»)ï¼
Within ±30% ï¼Fï¼
Dissipation factor
: 5.0% max.ï¼BJ, B7, C6, C7, LD(â»)ï¼
11.0% max.ï¼Fï¼
Insulation resistance : 50 MΩμF or 1000 MΩ whichever is smaller.
Note: â»LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Recovery
Class 1
Standard
High Frequency Type
None
40±2â
60±2â
90 to 95%RH
500ï¼24/ï¼0 hrs
6 to 24 hrs ï¼Standard conditionï¼ Note 5
Class 2
All items
Thermal treatmentï¼ at 150â for 1 hrï¼ Note 2
40±2â
90 to 95%RH
500ï¼24/ï¼0 hrs
24±2 hrs ï¼Standard conditionï¼ Note 5
16. Humidity Loading
Specified
Value
Temperature
Compensatingï¼Class1ï¼
Standard
Appearance
Capacitance change
Q
High Frequency Type
Insulation resistance
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±7.5% or ±0.75pF, whichever is larger.
: Cï¼30pFï¼Qâ§100ï¼10C/3
Câ§30pFï¼Qâ§200 ï¼Cï¼Nominal capacitanceï¼
: 500 MΩ min.
: No abnormality
: Câ¦2pFï¼Within ±0.4 pF
Cï¼2pFï¼Within ±0.75 pF
ï¼Cï¼Nominal capacitanceï¼
: 500 MΩ min.
High Permittivity ï¼Class2ï¼ Note 1
Appearance
: No abnormality
Capacitance change : Within ±12.5% ï¼BJ, B7, C6, C7, LD(â»)ï¼
Within ±30% ï¼Fï¼
Dissipation factor
: 5.0% max. ï¼BJ, B7, C6, C7, LD(â»)ï¼
11.0% max. ï¼Fï¼
Insulation resistance : 25 MΩμF or 500 MΩ, whichever is smaller.
Note: â»LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge
current
Recovery
Standard
Class 1
High Frequency Type
None
40±2â
60±2â
90 to 95%RH
500ï¼24/ï¼0 hrs
Rated voltage
50mA max.
6 to 24 hrs ï¼Standard conditionï¼ Note 5
Class 2
All items
Voltage treatment
ï¼Rated voltage are applied for 1 hour at 40âï¼ Note 3
40±2â
90 to 95%RH
500ï¼24/ï¼0 hrs
Rated voltage
50mA max.
24±2 hrsï¼Standard conditionï¼ Note 5
ⶠThis catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-01
|
▷ |