EVK105CH0R3BW-F Datasheet, PDF (12/21 Pages) Taiyo Yuden (U.S.A.), Inc – Notice for TAIYO YUDEN products

6. Capacitance （Tolerance）
Specified
Value
C□ 0.2pF≦C≦5pF
Standard
U□ 0.2pF≦C≦10pF
Temperature
SL C＞10pF
Compensating（Class1）
CH
High Frequency Type
RH
0.3pF≦C≦2pF
C＞2pF
: ±0.25pF
: ±0.5pF
: ±5% or ±10%
: ±0.1pF
: ±5%
High Permittivity （Class2）
BJ, B7, C6, C7, LD(※) : ±10% or ±20%,
F : ＋80/－20%
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Preconditioning
Measuring frequency
Measuring voltage Note
Bias application
Class 1
Standard
High Frequency Type
None
1ＭHz±10%
0.5 to 5Vrms
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1kHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1rms
one
7. Q or Dissipation Factor
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
C＜30pF : Q≧400＋20C
C≧30pF : Q≧1000 （C：Nominal capacitance）
Refer to detailed specification
High Permittivity （Class2） Note 1
BJ, B7, C6, C7：2.5% max., F：7% max.
Test
Methods and
Remarks
Preconditioning
Measuring frequey
Measuring voltage Note 1
Bias application
High Frequency Type
Measuring equipment
Measuring jig
Class 1
Standard
High Frequency Type
None
1ＭHz±10%
1GHz
0.5 to 5Vrms
: HP4291A
: HP16192A
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1ｋHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
8. Temperature Characteristic （Without voltage application）
Temperature
Compensating（Class1）
Standard
High Frequency Type
Temperature Characteristic ［ppm/℃］
C□ : 0
CH, CJ, CK
U□ : －750
UJ, UK
SL : ＋350 to －1000
Temperature Characteristic ［ppm/℃］
C□ : 0
CH
R□ : －220
RH
Tolerance ［ppm/℃］
H : ±60
J : ±120
K : ±250
Tolerance ［ppm/℃］
H : ±60
Specified
Value
High Permittivity （Class2）
Capacitance Reference
Specification
Temperature Range
change
temperature
B
BJ
X5R
±10%
±15%
20℃
25℃
－25 to ＋85℃
－55 to ＋85℃
B7
X7R
±15%
25℃
－55 to ＋125℃
C6
X6S
±22%
25℃
－55 to ＋105℃
C7
X7S
±22%
25℃
－55 to ＋125℃
LD(※)
X5R
±15%
25℃
－55 to ＋85℃
F
＋30/－80%
20℃
－25 to ＋85℃
F
Y5V
＋22/－82%
25℃
－30 to ＋85℃
Note : ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
（C₈₅－C₂₀）
C₂₀×△T
×10⁶（ppm/℃）
△T＝65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step
B、F
X5R、X7R、X6S、X7S、Y5V
1
Minimum operating temperature
2
20℃
25℃
3
Maximum operating temperature
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-01