SMCJ5 Datasheet, PDF (1/6 Pages) TAITRON Components Incorporated – 1500W Surface Mount Transient Voltage Suppressor

1500W Surface Mount
Transient Voltage Suppressor
SMCJ 5.0A - 170CA
1500W Surface Mount Transient Voltage Suppressor
Features
• Stand-off voltage from 5.0 to 170 volts
• Glass passivated junction
• 1500W peak pulse power capability with a 10/1000μs waveform,
repetition rate(duty cycle): 0.01%
• Fast response time: typically less than 1.0ps from 0v to VBR
• Low incremental surge resistance, excellent clamping capability
SMC
• High temperature soldering guaranteed: 250°C/10 seconds at terminals
• This series is UL recognized under component index. File number E315008
• RoHS Compliant
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
Unit
Conditions
VWM Stand-Off Voltage
5.0 to 170
V
PPPM
Peak Pulse Power Dissipation
on 10/1000μs Waveform(1) (2)
Minimum 1500
W
IPPM
IFSM
VF
TJ,TSTG
Peak Pulse Current
on 10/1000μs Waveform(1)
Peak Forward Surge Current
8.3ms Single Half Sine-wave,
Uni-directional only (2)
Maximum Instantaneous
Forward Voltage for Uni-
directional only
Operating Junction and Storage
Temperature Range
See Table
200
3.5
5.0
-55 to 150
A
A
SMCJ5.0~SMCJ90
V
SMCJ100~SMCJ170
°C
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2
(2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal
(3) Mounted on minimum recommended pad layout
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Rev. D/AH 2008-02-25
Page 1 of 6