SMBJ5 Datasheet, PDF (1/5 Pages) TAITRON Components Incorporated – 600W Surface Mount Transient Voltage Suppressor

SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
SMBJ5.0A~170CA
600W Surface Mount Transient Voltage Suppressor
SMB
Features
z Stand-off voltage from 5.0 to 170 volts
z 600W Peak Pulse Power capability on 10/1000 µs waveform
repetition rate(duty cycle): 0.01%
z Fast response time: typically less than 1.0ps from 0v to VBR
z Low incremental surge resistance, excellent clamping capability
z Typical IR less than 1 uA above 10V
z High temperature soldering guaranteed:250°C/10 seconds at terminals
z This series is UL recognized under component index. File number E315008
z RoHS Compliant
Mechanical Data
Case:
Epoxy:
Terminals:
Polarity:
Weight:
SMB JEDEC DO-214AA molded plastic
Meets UL 94V-0 flammability rating
Plated axial leads, solderable per MIL-STD-750,
Method 2026
Cathode indicated by color band except Bi-directional
0.003 ounces, 0.093 gram
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
Unit
Conditions
V WM
PPPM
IPPM
Stand-Off Voltage
Peak Pulse Power Dissipation
on 10/1000 us waveform
Peak Pulse current
on 10/1000 us waveform
PM(AV) Steady State Power Dissipation
IFSM Peak Forward Surge Current
VF
Maximum Instantaneous
Forward Voltage
TJ,TSTG
Operating and Storage
Temperature Range
5.0 to 170
600 Minimum
V
W Non-repetitive current pulse
See Table
5.0
100
3.5
VWM <100
5.0
VWM ≥100
-55 to 150
A Non-repetitive current pulse
W
At TL(Lead Temperature)=75°C
(Note 1)
A Note 1 &2
V IPP=25A, Note 2
°C
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: [phone] (800)-TAITRON (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Rev. C/AH 2007-08-01
Page 1 of 5