SMAJ5.0A Datasheet, PDF (1/6 Pages) Littelfuse – Silicon Avalanche Diodes - 400W Surface Mount Transient Voltage Supressors

SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
SMAJ5.0A~170CA
400W Surface Mount Transient Voltage Suppressor
Features
SMA
z Stand-off voltage from 5.0 to 170 volts
z 400W Peak Pulse Power capability on 10/1000 µs waveform
repetition rate(duty cycle): 0.01%
z Ideal for ESD protection of data lines in accordance with
IEC 1000-4-2 (IEC801-2)
z Ideal for EFT protection of data lines in accordance with
IEC 1000-4-4 (IEC801-4)
z Fast response time: typically less than 1.0ps from 0v to VBR
z Low incremental surge resistance, excellent clamping capability
z Typical IR less than 1 uA above 10V
z High temperature soldering guaranteed:
250°C/10 seconds at terminals
z This series is UL recognized under component index. File number E315008
z RoHS Compliant
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
Unit
Conditions
V WM
PPPM
IPPM
Stand-Off Voltage
Peak Pulse Power Dissipation
on 10/1000 us waveform
Peak Pulse current
on 10/1000 us waveform
5.0 to 170
Minimum 400
See Table
PM(AV) Steady State Power Dissipation
1.0
IFSM Peak Forward Surge Current
VF
Maximum Instantaneous
Forward Voltage
TJ,TSTG
Operating Junction and Storage
Temperature Range
40.0
3.5
-55 to 150
V
W
Non-repetitive current pulse
A
Non-repetitive current pulse
W
At TL(Lead Temperature)=75°C (Note 1)
A
8.3ms single half sine-wave superimposed
on rated load (uni-direction only), TL=75°C
V
8.3ms single half sine-wave
(uni-direction only), TL=75°C
°C
Note: (1) Mounted on copper pad area of 0.2" x 0.2" (5.0mmx5.0mm).
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: [phone] (800)-TAITRON (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Rev. D/AH 2007-08-01
Page 1 of 6