SA5 Datasheet, PDF (1/6 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Glass Passvated Junction
Transient Voltage Suppressor
SA5.0A~180CA
500W Glass Passivated Junction Transient Voltage Suppressor
Features
• Stand-off voltage from 5.0 to 180 volts
• 500W Peak Pulse Power capability on 10/1000 μs waveform
repetition Rate(duty cycle): 0.01%
• Fast response time: typically less than 1.0ps from 0v to VBR for
Uni-directional and 5.0ns for Bi-directional
• Excellent clamping capability
• Low incremental surge resistance
• Typical I_R less than 1 mA above 10V
DO204AC
(DO-15)
• High temperature soldering guaranteed 265°C/10 seconds
/.037" (9.5mm) lead length, 5lbs (2.3kg),tension
• This series is UL recognized under component index. File number E315008
• RoHS Compliant
Maximum Ratings (T _Ambient=25ºC unless noted otherwise)
Symbol
Description
V WM Stand-Off Voltage
Value
5.0 to 180
Unit
Volts
Conditions
PPPM
Peak Pulse Power Dissipation
on 10/1000 us waveform
IPPM
Peak Pulse current
on 10/1000 us waveform
Minimum 500 Watts Non-repetitive current pulse
See Table
Amps Non-repetitive current pulse
PM(AV) Steady State Power Dissipation
3
Watts At TL(Lead Temperature)=75°C (1)
IFSM Peak Forward Surge Current
TJ,TSTG
Operating and Storage
Temperature Range
70
-55 to 175
Amps
8.3ms single half sine-wave superimposed
on rated load (JEDEC method) (2)
°C
Note: 1. Mounted on copper pad area of 1.6" x 1.6" (40x40mm) per fig.5.
2. Duty Cycle = 4 pulses per minute maximum.
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON (800)-247-2232 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Rev. B/AH 2007-11-10
Page 1 of 6