P4SMA6 Datasheet, PDF (1/6 Pages) TAITRON Components Incorporated – 400W Surface Mount Transient Voltage Suppressor

400W Surface Mount Transient
Voltage Suppressor
P4SMA6.8A - P4SMA250CA
400W Surface Mount Transient Voltage Suppressor
SMA
Features
z Breakdown voltage from 6.8 to 250 volts
z Low inductance, excellent clamping capability
z Repetition rate(duty cycle): 0.01%
z Fast response time: typically less than 1.0ps from 0v to VBR
z For unidirectional types
z Typical IR less than 1 µA above 10V
z High temperature soldering guaranteed:250°C/10 seconds at terminals
z This series is UL recognized under component index. File number E315008
z RoHS Compliant
Mechanical Data
Case:
Epoxy:
Terminals:
Polarity:
Mounting position:
Weight:
JEDEC DO-214AC (SMA) molded plastic over glass passivated junction
Meets UL 94V-0 flammability rating
Solder plated, solderable per MIL-STD-750, Method 2026
Color band denoted positive end (cathode)
Any
0.002 ounces, 0.061 gram
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
PPPM
IPPM
Peak Pulse Power Dissipation
on 10/1000μs Waveform
Peak Pulse current
on 10/1000μs Waveform
Minimum 400
See Table
IFSM Peak Forward Surge Current
40
TJ,TSTG
Operating Junction and Storage
Temperature Range
-55 to 150
Unit
Conditions
W
Non-repetitive current pulse, per FIG.3 and
derated above TA=25° C per FIG.2
A
A
8.3ms single half sine-wave superimposed
on rated load, (JEDEC Method) (Note 1,2)
°C
Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each terminal
2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum.
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Rev. D/AH 2008-02-25
Page 1 of 6