15SMC68A Datasheet, PDF (1/5 Pages) Central Semiconductor Corp – UNI-DIRECTIONAL GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 1500 WATTS, 6.8 THRU 200 VOLTS

1500W Surface Mount
Transient Voltage Suppressor
1.5SMC6.8A - 1.5SMC250CA
1500W Surface Mount Transient Voltage Suppressor
Features
• Low inductance, excellent clamping capability
• Repetition rate(duty cycle): 0.05%
• Fast response time: typically less than 1.0ps from 0V to BV min.
• Typical I_R less than 1 µA above 10V
SMC
• High temperature soldering guaranteed 250°C/10 seconds at terminals
• This series is UL recognized under component index. File number E315008
• RoHS Compliant
Mechanical Data
Case:
Epoxy:
Terminals:
Polarity:
Mounting position:
Weight:
JEDEC DO-214AB (SMC) molded plastic over glass passivated junction
Meets UL 94V-0 flammability rating
Solder plated, solderable per MIL-STD-750, Method 2026
Color band denoted positive end (cathode) except Bi-directional
Any
0.007 Ounce, 0.21 gram
Maximum Ratings (T _Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
PPPM
IPPM
Peak Pulse Power Dissipation
on 10/1000μs Waveform
Peak Pulse Current
on 10/1000μs Waveform
Minimum 1500
See Table
IFSM Peak Forward Surge Current
200
TJ,TSTG
Operating Junction and Storage
Temperature Range
-55 to 150
Unit
W
A
A
°C
Conditions
Non-repetitive current pulse, per FIG.3 and
derated above TA=25° C per FIG.2
Non-repetitive current pulse
8.3ms single half sine-wave superimposed
on rated load, (JEDEC Method) (Note 1,2)
Note: 1. Mounted on 8.0mm x 8.0mm copper pads to each terminal
2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum.
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Rev. D/AH 2008-02-25
Page 1 of 5