MDL Datasheet, PDF (2/2 Pages) Systemsensor advanced ideas. – Sync Circuit Module

Sync•Circuit^™ Module Specifications
Architectural/Engineering Specifications
Synchronization Circuit Module shall be a System Sensor Sync•Circuit Model _________ listed to UL464 and shall be approved for fire protective service. The
module shall synchronize SpectrAlert® strobes at 1 Hz and horns at temporal 3. Also, the module shall be capable of silencing the horns on horn/strobe models,
while operating the strobes, over a single pair of wires. The module shall be capable of mounting to a 411⁄16˝× 411⁄16˝× 21⁄8˝ back box and shall control two Style Y
(class B) or one Style Z (class A) circuit. The module shall be capable of multiple zone synchronization by connecting multiple modules together via a slave-in/
slave-out arrangement and re-synchronizing each other along the chain. Note: The module shall not operate on a coded power supply.
Physical Specifications
Dimensions
51⁄4˝ L × 51⁄4˝ W
Mounting
411⁄16˝ × 411⁄16˝ × 21⁄8˝ back box
Indoor Operating Temperature
32° to 120° F (0° to 49° C)
Electrical/Operating Specifications
Operating Voltage
12 or 24 VDC and FWR unfiltered
Operating Voltage Range (12 V)
Operating Voltage Range (24 V)
Maximum Load on Loop
U.S. Patent Nos.
9 to 17.5 VDC
17 to 33 VDC
3 Amps/zone
5,5^H98^O,1^R3^N9 ^{S SILENCED OVER TWO WIRE CIRCUIT}
5,8^MT5_O0^A,^S1_IN7^TT8^{EERRMROUDPTUALBELHEOPRONWCEORNSTOROURLCCEONNECTS}
Horns and Chimes Silenced Over Two-Wire Circuit
1. Any mix of Horn/Strobes, Chime/Strobes or Strobe only devices is acceptable
2. Horn and chime control connects to interruptible power source
FACP #1
(+)
NAC1
(–)
(+)
NAC2
(–)
(+)
NAC3
(–)
EOL
MASTER MODULE
}^{(+) HORN}
(–) CONTROL
ZONE 1
OUT
}^{(+) ZONE 1}
(–) IN
ZONE 2
OUT
}^{(+) ZONE 2}
(–) IN
SYNC
ERROR
}^{(+) SLAVE}
(–) IN
SLAVE
OUT
TO NEXT
SPECTRALERT
DEVICE OR
EOL
TO NEXT
SPECTRALERT
DEVICE OR
EOL
FACP #2
(+)
NAC1
(–)
(+)
NAC2
(–)
TEMP JUMPER OFF
SLAVE MODULE
} HORN
CONTROL
ZONE 1
OUT
}^{(+) ZONE 1}
(–) IN
ZONE 2
OUT
}^{(+) ZONE 2}
(–) IN
SYNC
ERROR
}^{(+) SLAVE}
(–) IN
SLAVE
OUT
TEMP JUMPER OFF
TO NEXT
SPECTRALERT
DEVICE OR
EOL
TO NEXT
SPECTRALERT
DEVICE OR
EOL
All SpectrAlert horns,
horn/strobes, and strobes
will operate in sync.
Current Draw and Ordering Information
Average Current (mA)
Red
White
Voltage
DC
FWR
MDL,
MDLW,
12
10
12
MDLA (Canadian) MDLWA (Canadian) ₂₄
11
15
Peak Current (mA)
DC
FWR
30
31
35
37
In-rush Current (mA)
DC
FWR
87
122
198
262
3825 Ohio Avenue • St. Charles, IL 60174
Phone: 800-SENSOR2 • Fax: [phone]
©2007 System Sensor.
Product specifications subject to change without notice. Visit systemsensor.com for
current product information, including the latest version of this data sheet.
A05-1007-005 • 6/07 • #1676