 English |
|
|
|
|
|
|
|
| SS24ADAS Datasheet, PDF (1/4 Pages) Systemsensor advanced ideas. – Synchronized Strobes with SyncCircuit | |||
| |||
|
SS24ADAS
Synchronized Strobes
with Syncâ¢Circuitâ¢
A Division of Pittway
3825 Ohio Avenue, St. Charles, IL 60174
1-800-SENSOR2 (736-7672), Fax 630-377-6495
http://www.systemsensor.com
Models Available
SS2415ADAS Strobe with Syncâ¢Circuit
SS241575ADAS Strobe with Syncâ¢Circuit
MASS2415ADAS Sounder/Strobe with Syncâ¢Circuit
MASS241575ADAS Sounder/Strobe with Syncâ¢Circuit
Features
⢠Works on two wire circuit
⢠No synchronization module required
⢠Synchronized and unsynchronized strobes can be
combined on the same zone in any combination
⢠Patent pending Syncâ¢Circuitâ¢
⢠24 VDC versions only
⢠15 and 15/75 cd versions available
⢠Available with Multi-Alert⢠Sounder
⢠Constant current draw over voltage range
⢠Stand alone strobe mounts to single gang box with
MP-SF plate
⢠ADA compliant, UL 1971 listed
⢠Installer easy plug-in terminal strip
on stand-alone strobe
The SS24ADAS Series Synchronized Strobes are crystal
controlled to flash at precisely one flash per second. When
power is applied to an indicating circuit controlled by one
controller, all SS24ADAS or MASS24ADAS series devices in
that zone will flash simultaneously. No synchronizing
modules or coded supplies are necessary. The strobes can
be used in any combination with other System Sensor
ADA strobes, ADA horn/strobes, and ADA speaker/
strobes.
The unique lens/reflector design maintains the UL 1971
light dispersement pattern while flashing at the ADA
minimum 1 flash per second. Available in red at 24 VDC,
the SS24ADAS strobes can be surface mounted directly to
a standard 4â³ backbox or can be mounted to our semi-
flush plate for recessed electrical boxes. They are also
available in combination with System Sensor Multi-Alertâ¢
horns for both visible and audible signaling.
Specifications
Input terminals:
Shipping Weight:
SS-ADA Strobes:
MASS-ADA
Horn/Strobes:
Operating
Temperature Range:
Mounting:
Surface:
Semiflush:
© System Sensor 8/96
18 â 12 AWG
5 oz. (141g)
10.4 oz. (293g)
Dimensions:
TOP
4â³
32° F to 120° F (0° C to 49° C)
4â³
23/4â³
1/4â³
3â³
4â³ Ã 4â³ Ã 11/2â³ standard backbox
(21/8â³ recommended)
4â³ Ã 4â³ Ã 11/2â³ standard backbox
(21/8â³ recommended) with
MP-SF semiflush mounting plate
(order separately)
SS Series ADA
This document is not intended to be used for installation purposes.
TOP
4â³
4â³
33/4â³
111/32â³
53/32â³
MASS Series ADA
APPROVED
A05-239-03
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese