|
SP2C2415 Datasheet, PDF (1/2 Pages) Systemsensor advanced ideas. – Ceiling Mount Speaker Strobes | |||
|
A U D I B L E / V I S I B L E N O T I F I C AT I O N
SpectrAlert⢠SP2C Series
Ceiling Mount Speaker/
SStPr2oCbeSseries Ceiling
Mount Speaker/Strobes
Models Available
Speaker/Strobe Models
SP2C2415
SP2C241575
SP2C2430
SP2C2475
SP2C2495
SP2C24115
SP2C24177
Accessory Back Box Skirt
BBSCW
SSPta2nCda2r4d 1A5pp7l5ication
BABuxSiCliaWr y Form C Relay
Product Overview
Combines SpectrAlert ceiling mount
strobe and speaker technology
â Low current draw
â Fidelity sound quality
24 volt models available with 15, 15/75,
30, 75, 95, 115, and 177 candela
strobes
25.0 and 70.7 volt speaker with four
ï¬eld-selectable power taps
Ceiling-speciï¬c shape, proï¬le, and
aesthetics
Strobe is synchronizable with MDL
Syncâ¢Circuit⢠module
Mounts to 4â³x4â³x2 1/8â³ back box
without an extension ring
Round shape offers greater placement
ï¬exibility
System Sensorâs SpectrAlert® SP2C series ceiling speaker/strobes represent the
combination of leading-edge strobe and speaker technology with a design speciï¬cally
intended for ceiling mount applications.
Technology. SpectrAlert SP2C ceiling speaker/strobes combine the low current
draw of the ceiling mount SpectrAlert strobes, with the intelligible, ï¬delity
sound quality of the SpectrAlert SP200 series evacuation speaker.
Flexibility. Like all SpectrAlert products, the SP2C series ceiling speaker/strobes
feature the ï¬exibility to meet a wide variety of applications. The 24 volt strobe
is available in seven different candelas, including 177 candela for sleeping areas.
The speaker offers ï¬eld-selectable 25.0/70.7 voltage and 1â4, 1â2, 1, and 2 watt
power taps.
Aesthetics. The SP2C ceiling speaker/strobes offer a design that is sensitive to
the aesthetic demands of ceiling mount applications. The round shape maintains
a low proï¬le appearance, similar to that of a smoke detector. Its stylish curves
and design further reï¬ne the aesthetics over other generic wall/ceiling mount
designs. Yet SpectrAlertâs round shape provides clearly visible âFIREâ identiï¬ca-
tion from all angles.
Installation. The SP2C ceiling speaker/strobes include several features to simplify
installation. By incorporating the SP200 series speaker, the entire unit may be
mounted to a 4â³Ã4â³Ã21/8â³ back box, without the need for an extension ring. An
optional back box skirt is also available for surface-mount applications. And
with SpectrAlertâs round shape, it is not necessary to align the back box with
the roomâs walls. SpectrAlert always lines up.
Engineering Speciï¬cations
Ceiling speaker/strobe shall be a System Sensor Model __________ listed to
UL1480 and UL 1971 and be approved for ï¬re protective signaling systems.
Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms, and
shall have a frequency range of 400 to 4000 Hz. Speaker shall have power
taps which are selected by shunts. The strobe shall comply with the NFPA72
requirements for visible signaling appliances, ï¬ashing at 1 Hz over the strobeâs
entire operating voltage range. The strobe light shall consist of a xenon ï¬ash
S4048
7320-1209:200
63-00-E tube and associated lens/reï¬ector system.
|
▷ |