S2475RLP Datasheet, PDF (1/2 Pages) Systemsensor advanced ideas. – SpectrAlert™ Colored Lens Strobes and Horn/Strobes

SpectrAlert^™
Colored Lens
Strobes and Horn/Strobes
Models Available*
Strobes
Red
S2475RLP
S2475ALP
S2475GLP
S2475BLP
White
S2475RLPW
S2475ALPW
S2475GLPW
S2475BLPW
Horn/Strobes
Red
P2475RLP
P2475ALP
P2475GLP
P2475BLP
White
P2475RLPW
P2475ALPW
P2475GLPW
P2475BLPW
Accessories
Red
S-MP
BBS
White
S-MPW
BBSW
Product Overview
Available with red, amber, green, or
blue lens
Meets UL 1638 (Private Mode)
requirements
Strobes & Horn/Strobes operate at
24 volts
Low current draw
Field-selectable horn tones
Universal mounting plate included
Accessory mounting plates available
Synchronizable with Sync•Circuit^™
module
SpectrAlert Colored Lens series strobes and horn/strobes provide many of the same
benefits as the original SpectrAlert design, but with the choice of colored lenses for
signaling differentiation. Intended for private mode applications, the Colored Lens
strobe and horn/strobe meet UL 1638, ‘Private Mode Emergency and General Utility
Signaling’.
Flexibility. SpectrAlert Colored Lens products are designed for use in niche
applications not requiring UL 1971 notification devices. SpectrAlert strobes and
horn/strobes are offered with red, amber, green, and blue lenses for use in spe-
cial alarm systems such as gas alarms, suppression systems, non-fire applica-
tions requiring evacuation signaling, and as warning, trouble, or identification
signals.
Performance. The low current draw of SpectrAlert products helps minimize
power supply requirements. By consuming less current, the flexibility to connect
more devices per loop is possible, for a lower installed cost.
Installation. SpectrAlert products are easy to use, to help reduce installation
costs. Each SpectrAlert includes a universal mounting plate for 4″ square and
single gang back box mounting. Accessory mounting plates are also available
for small footprint or surface-mount applications.