RRS-MOD Datasheet, PDF (1/2 Pages) Systemsensor advanced ideas. – Synchronization Module

CONVENTIONAL
DETECTION
Series Reversing Relay/
Synchronization Module
Model
RRS-MOD
Reversing relay/synchronization module
for i³ series sounder models
RRS-MOD
Product Overview
Compatible with 2- and 4-wire i³ detec-
tors equipped with a sounder
System Sensor’s RRS-MOD reversing relay/synchronization module enhances the
operation of 2- and 4- wire i³ series detectors equipped with a sounder.
Activates all i³ sounders on a loop when
one alarms
Synchronizes all i³ sounders on the loop
for a clear alarm signal
Can be used with bell/alarm, alarm relay,
or NAC outputs
Includes a field-selectable switch to
accommodate both coded and continu-
ous alarm signals
Allows i³ detector silencing from the
panel or keypad
Operates on 12- and 24-volt systems
Installation ease. The RRS-MOD includes a Velcro attachment for easy installa-
tion into the fire alarm control panel cabinet. A quick-connect harness and
color-coded wires simplify connections.
Intelligence. The RRS-MOD’s design is flexible to accommodate virtually any
application. The RRS-MOD is compatible with both 2- and 4-wire i³ series
detectors operating over 12V and 24V systems. The module can be used with
either bell/alarm, alarm relay, or NAC outputs, and its field-selectable switch
accommodates both coded and continuous alarm signals.
Instant inspection. To meet fire alarm requirements, the RRS-MOD activates all
i³ sounders on a loop when one alarms. Additionally, the RRS-MOD synchro-
nizes the output of the i³ sounders, regardless of whether the panel’s alarm sig-
nal is continuous or coded, to ensure a clear alarm signal.
Quick-connect harness and color coded
wires facilitate connections