P1215 Datasheet, PDF (1/4 Pages) Systemsensor advanced ideas. – Wall-Mount Horns, Strobes, and Horn/Strobes

A U D I B L E / V I S I B L E N O T I F I C AT I O N
Wall-Mount Horns, Strobes,
and Horn/Strobes
Models Available*
Horn/Strobes
P1215
P2415
P2430
P24110
P121575
P241575
P2475
Strobes
S1215
S2415
S2430
S24110
S121575
S241575
S2475
Horns
H12/24
*Refer to Ordering Information for other
configurations
Horn/Strobe
Horn
Strobe
Back Box Skirt
Product Overview
Meet UL and ADA signaling requirements
Lower current draw
More devices per loop
Lower installed cost
Universal mounting plate included
Accessory mounting plates available
Field-selectable horn tones
Electromechanical / 3kHz
Temporal 3 / Non-temporal 3
High / Low dBA output
Available in 15, 15/75, 30, 75, and 110
candela
Synchronizable horns and strobes with
Sync•Circuit^™ module
Aesthetic design
System Sensor’s SpectrAlert^® wall-mount series includes a complete line of electronic
horns, strobes, and horn/strobes. Intended for primary signaling use, SpectrAlert
products meet UL1971, UL464, and Americans with Disabilities Act requirements.
Technology. With its extremely efficient reflector design and Xenon flash tube,
SpectrAlert offers current draw reductions as high as 40% over previous gener-
ation designs. By consuming less current, the flexibility to connect more devices
per loop is possible, for a lower installed cost.
Installation. SpectrAlert products offer installation ease which also lowers the
installed cost. By taking up no room in the back box, SpectrAlert strobes and
horn/strobes make wiring connections simpler and faster. Each SpectrAlert
includes a universal mounting plate for 4″ square and single gang back box
mounting. Accessory mounting plates are also available for small footprint or
surface mount applications.
Flexibility. SpectrAlert offers the flexibility to meet a broad range of
requirements. The SpectrAlert horns and horn/strobes feature a number of
field-selectable/reversible horn tones. For visible requirements, SpectrAlert
strobes and horn/strobes are available in a wide variety of configurations to
address non-sleeping area, sleeping area, and corridor requirements.
Offerings include 24-volt models at 15, 15/75, 30, 75, and 110 candela,
and 12-volt devices at 15 and 15/75 candela.
Aesthetics. To meet building owner aesthetic requirements, SpectrAlert
incorporates a stylish, low profile design. And this aesthetic is consistent across
all SpectrAlert wall-mount products.