MBR1035 Datasheet, PDF (1/2 Pages) Motorola, Inc – SCHOTTKY BARRIER RECTIFIERS 10 AMPERES 20 to 45 VOLTS

MBR1035 ~ MBR1060
PRV : 35~60 Volts
Io : 10 Amperes
FEATURES :
* Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
* Guardring for overvoltage protection
* For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
* High temperature soldering : 250°C/10 seconds,
0.25" (6.35mm) from case
* Pb / RoHS Free
MECHANICAL DATA :
* Case : JEDEC TO-220AC molded plastic body
* Terminals: Plated leads, solderable per
MIL-STD-750 Method 2026
* Polarity: As marked
* Mounting Position: Any
* Weight : 2.24 grams (Approximately)
SCHOTTKY BARRIER
RECTIFIER DIODES
TO-220AC
0.154(3.91)DIA.
0.148(3.74)
0.415(10.54)MAX.
0.055(1.39)
0.113(2.87)
0.045(1.14)
0.103(2.62)
0.145(3.68)
0.135(3.43)
0.635(16.13)
0.625(15.87)
PIN 1
12
0.350(8.89)
0.330(8.39)
0.160(4.06)
0.140(3.56)
PIN 2
CASE
0.205(520)
0.195(4.95)
0.037(0.94)
0.027(0.68)
0.185(4.70)
0.175(4.44)
0.603(15.32)
0.573(14.55)
0.560(14.22)
0.530(13.46)
0.022(0.56)
0.014(0.36)
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS ( Tc = 25 °C unless otherwise noted)
RATINGS
SYMBOL MBR1035 MBR1045 MBR1050 MBR1060 UNIT
Maximum Recurrent Peak Reverse Voltage
Maximum Working Peak Reverse Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current (See Fig. 1)
Peak Forward Surg Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum Instantaneous Forward Voltage (Note 1)
at I_F = 10 A, T_C = 25 °C
at I_F = 10 A, T_C = 125 °C
Maximum Average Reverse Current at
Rate Peak Reverse Voltage
T _C = 25 °C
T _C = 125 °C
Typical Thermal Resistance
Operating Junction Temperature Range
Storage Temperature Range
V_RRM
V_RWM
V_DC
I_F(AV)
I_FSM
V_F
I_R
R_θJC
T_J
T_STG
35
45
50
60
V
35
45
50
60
V
35
45
50
60
V
10
A
150
A
-
0.80
0.57
0.70
0.10
15
2.0
-65 to + 150
-65 to + 175
V
mA
°C/W
°C
°C
Note :
(1) Pulse test : 300 µs pluse width, 1% duty cycle
Page 1 of 2
Rev. 01 : February 22, 2006