English
Language : 

PQ60050EGL15 Datasheet, PDF (6/13 Pages) SynQor Worldwide Headquarters – Eighth-brick DC/DC Converter
Technical Specification
Input: 35-75 V
Output: 5.0 V
Current: 15 A
Package: Eighth-brick
15
14
13
12
11
10
9
8
7
6
5
400 LFM (2.0 m/s)
4
300 LFM (1.5 m/s)
3
200 LFM (1.0 m/s)
2
100 LFM (0.5 m/s)
1
50 LFM (0.25 m/s)
0
0
25
40
55
70
85
Ambient Air Temperature (oC)
Figure 7: Maximum output power-derating curves vs. ambient air tem-
perature for airflow rates of 50 LFM through 400 LFM with air flowing
from output to input (nominal input voltage).
Semiconductor junction temperature is
within 1°C of surface temperature
Figure 8: Thermal plot of converter at 11 amp load current (56W) with
55°C air flowing at the rate of 200 LFM. Air is flowing across the con-
verter from output to input (nominal input voltage).
Figure 9: Turn-on transient at full load (resistive load) (10 ms/div).
Input voltage pre-applied. Ch 1: Vout (2V/div). Ch 2: ON/OFF input
(5V/div)
Figure 10: Turn-on transient at zero load (10 ms/div). Ch 1: Vout
(2V/div). Ch 2: ON/OFF input (5V/div).
Figure 11: Output voltage response to step-change in load current (50%-
75%-50% of Iout(max); dI/dt = 0.1A/µs). Load cap: 10µF, 100 mΩ ESR tan-
talum cap and 1µF ceramic cap. Ch 1: Vout (100mV/div), Ch 2: Iout (5A/div).
Figure 12: Output voltage response to step-change in load current (50%-
75%-50% of Iout(max): dI/dt = 5A/µs). Load cap: 470µF, 30 mΩ ESR tanta-
lum cap and 1µF ceramic cap. Ch 1: Vout (100mV/div), Ch 2: Iout (5A/div).
Product # PQ60050EGL15
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2EG650D Rev. C
11/8/04
Page 6