MQFL-28-12S Datasheet, PDF (6/16 Pages) SynQor Worldwide Headquarters – HIIGH RELLIIABIILLIITTY DC/DC CONVERTTER

Technical Specification
MQFL-28-12S
Output: 12.0 V
Current: 10 A
Figure 7: Turn-on transient at full resistive load and zero output capac-
itance initiated by ENA1. Input voltage pre-applied. Ch 1: Vout
(3V/div). Ch 2: ENA1 (5V/div).
Figure 8: Turn-on transient at full resistive load and 3 mF output
capacitance initiated by ENA1. Input voltage pre-applied. Ch 1: Vout
(3V/div). Ch 2: ENA1 (5V/div).
Figure 9: Turn-on transient at full resistive load and zero output capac-
itance initiated by ENA2. Input voltage pre-applied. Ch 1: Vout
(3V/div). Ch 2: ENA2 (5V/div).
Figure 10: Turn-on transient at full resistive load and zero output
capacitance initiated by Vin. ENA1 and ENA2 both previously high.
Ch 1: Vout (3V/div). Ch 2: Vin (10V/div).
Figure 11: Output voltage response to step-change in load current (50%-
100%-50% of Iout (max). Load cap: 1µ F ceramic cap and 10µ F, 100 mW ESR
tantalum cap. Ch 1: Vout (200mV/div). Ch 2: Iout (10A/div).
Figure 12: Output voltage response to step-change in load current (0%-50%-
0% of Iout (max). Load cap: 1µ F ceramic cap and 10µ F, 100 mW ESR tanta-
lum cap. Ch 1: Vout (200mV/div). Ch 2: Iout (10A/div).
Product # MQFL-28-12S
Phone [phone]
www.synqor.com
Doc.# 005-2MQ120S Rev. B 1/21/08
Page 6