|
MQME-28E-P Datasheet, PDF (5/13 Pages) SynQor Worldwide Headquarters – High Reliability EMI Filter | |||
|
◁ |
Technical Specification
MQME-28E-P
Current: 20A
Figure 1: Typical Common Mode and Differential Mode Attenuation
provided by the filter as a function of frequency. Both input lines are
connected to chassis ground through 50W resistors. The filter case is
also connected to chassis ground.
Figure 2: Typical Output Impedance (magnitude) of the filter looking
back into its output pins with the input pins connected to a source with
zero source impedance.
Figure 3: MIL-STD-461E Method CE101 Low Frequency Conducted
Emissions. Limit line (in red) is the âSubmarine Applications DC
Curveâ. Setup described on Page 7.
Figure 4: MIL-STD-461E Method CE102 High Frequency Conducted
Emissions. Limit line (in red) is the âBasic Curveâ. Setup described on
Page 7.
Figure 5: MIL-STD-461E Method RE101 Low Frequency Radiated
Figure 6: MIL-STD-461E Method RE102 High Frequency Radiated
Emissions. Limit line (in red) is the âStandard Curveâ from MIL-STD-
Emissions. Limit line (in red) is the âSubmarine External to Pressure
461C Method RE01, which is more strict than all RE101 limits. Setup
Hull Curveâ. Setup described on Page 7.
described on Page 7.
Product # MQME-28E-P
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0005135 Rev. A
03/18/09
Page 5
|
▷ |