PQ60120QEA25 Datasheet, PDF (3/14 Pages) SynQor Worldwide Headquarters – No minimum load requirement

Baseplated Mechanical Diagram
Input: 35-75V
Output: 12V
Current: 25A
Package: Quarter-brick
1.45 [36.7]
1.03 [26.2]
.600 [15.24]
.450 [11.43]
.300 [7.62]
.150 [3.81]
2.30
[58.4]
1.86
[47.2]
2.00
[50.8]
87 6 5 4
TOP VIEW
.43 [10.8]
.300 [7.62]
.600 [15.24]
12 3
.21
[5.3]
.22
[5.6]
M3 THREADED INSERTS
4 PLACES
SEE NOTES 1 & 2
.14 [3.6]
.180
[4.57]
SEE NOTE 6
SIDE VIEW
030 ±.024
[0.76 ±0.6]
BOTTOMSIDE
CLEARANCE
.496 ±.014
[12.6 ±0.35]
OVERALL HEIGHT (RSS)
NOTES
1) M3 screws used to bolt unit's baseplate to other surfaces
such as heatsink must not exceed 0.100" (2.54mm) depth
below the surface of the baseplate.
2) Applied torque per screw should not exceed 6in-lb (0.7Nm).
3) Baseplate flatness tolerance is 0.004" (.10mm) TIR for surface.
4) _{Pins 1-3, 5-7 are 0.40" (1.02mm) dia. with 0.080" (2.03mm)}
standoff shoulders.
5) _{Pins 4 & 8 are 0.062" (1.57mm) dia. with 0.100" (2.54mm)}
standoff shoulders.
6) Other pin extension lengths available.
7) All Pins: Material - Copper Alloy
Finish: Matte Tin over Nickel Plate
8) Undimensioned components are shown for visual reference only.
9) Weight: 1.6 oz. (46g)
10) All dimensions in inches (mm)
Tolerances: X.XXin +/-0.02 (X.Xmm +/-0.5mm)
10)
X.XXXin +/-0.010 (X.XXmm +/-0.25mm)
11) Workmanship: Meets or exceeds IPC-A-610 Class II
Pin Name
PIN DESIGNATIONS
Function
1
Vin(+)
Positive input voltage
2
ON/OFF
TTL input to turn converter on and off, referenced
to Vin(–), with internal pull up.
3
Vin(-)
Negative input voltage
4
Vout(-)
5 SENSE(–)
6
TRIM
7 SENSE(+)
8
Vout(+)
Negative output voltage
Negative remote sense (See note 1)
Output voltage trim (See note 2)
Positive remote sense (See note 3)
Positive output voltage
Notes:
1) SENSE(–) should be connected to Vout(–) either remotely or at the converter.
2) Leave TRIM pin open for nominal output voltage.
3) SENSE(+) should be connected to Vout(+) either remotely or at the converter.
Product # PQ60120QEx25
Phone [phone]
www.synqor.com
Doc.# 005-2QE612J Rev. G
01/14/15
Page 3