PQ60050HZX60 Datasheet, PDF (3/16 Pages) SynQor Worldwide Headquarters – High efficiency, 93% at full rated load current

Encased Mechanical
Input: 35-75V
Output: 5V
Current: 60A
Package: Half-brick
2.00 [50.8 ]
1.400 [35.56 ]
1.000 [25.4 ]
.700 [17.78 ]
.400 [10.16 ]
2.486 .020 [63.14 0.5]
.243 .020
[6.17 0.5]
.512
+.002
-.005
[ ] ¹³
+0.05
-0.12
OVERALL
HEIGHT
SIDE VIEW
.163
[4.14 ]
2.386 .020
[60.6 0.5]
1.90
[48.3 ]
.233 .020
[5.92 0.5]
9
8
76
5
TOP VIEW
.243 .020
[6.17 0.5]
1.90
[48.3 ]
12
B3
4
.543 .020
NOTE^[1S^{3.79 0.5]}
1) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
.400 [10.16 ]
.800 [20.32 ]
1.00 [25.4 ]
1.400 [35.56 ]
THRU HOLE
M3 (SEE NOTE 8)
STANDOFFS (4)
.027
+.007
-.010
[ ] ^0.69
+0.17
-0.25
BOTTOMSIDE CLEARANCE
PIN DESIGNATIONS
Pin Name Function
2) Baseplate flatness tolerance is 0.004" (.10 mm) TIR for surface.
3) Pins 1-4, 6-8, and B are 0.040” (1.02mm) diameter, with 0.080”
(2.03mm) diameter standoff shoulders.
4) Pins 5 and 9 are 0.080” (2.03 mm) diameter with 0.125”
(3.18 mm) diameter standoff shoulders.
5) All Pins: Material - Copper Alloy; Finish - Matte Tin over Nickel plate
6) Undimensioned components are shown for visual reference only.
7) Weight: 5 oz. (142g) typical
8) Threaded and Non-Threaded options available
9) All dimensions in inches (mm).
Tolerances:
x.xx +/-0.02 in. (x.x +/-0.5mm)
x.xxx +/-0.010 in. (x.xx +/-0.25mm)
unless otherwise noted.
10) Recommended pin length is 0.03" (0.76 mm) greater than the PCB
thickness.
11) Workmanship: Meets or exceeds IPC-A-610C Class II
1
Vin(+) Positive input voltage
2
ON/OFF
TTL input to turn converter on and off,
referenced to Vin(–), with internal pull up.
B SHARE(+) _{Active current share differential pair}
3 SHARE(-) ^{(See note 4)}
4
Vin(–) Negative input voltage
5
Vout(–) Negative output voltage
6 SENSE(–) Negative remote sense (See note 1)
7
TRIM
Output voltage trim (See note 2)
8 SENSE(+) Positive remote sense (See note 3)
9
Vout(+) Positive output voltage
Notes:
1) SENSE(–) should be connected to Vout(–) either remotely or at the converter.
2) Leave TRIM pin open for nominal output voltage.
3) SENSE(+) should be connected to Vout(+) either remotely or at the converter.
4) Full-Featured option only. Pin 3 and Pin B not populated on standard model.
Product # PQ60050HZx60
Phone [phone]
www.synqor.com
Doc.# 005-0005974 Rev. C
12/30/13
Page 3