IQ040PFQTC30 Datasheet, PDF (3/7 Pages) SynQor Worldwide Headquarters – Passive EMI Filter

Mechanical Drawing
Top View
1.536±.020 (39.01±0.5)
0.600 (15.24)
0.300 (7.62)
0.253±.020
(6.43±0.5)
65
4
0.263±.020
(6.68±0.5)
Technical
Specification
IQ040PFQTC30
Side View
0.500 ± 0.025
(12.7 ± 0.63)
Overall Height
.18
(4.57)
2.00
(50.8)
1.86
(47.2)
2.386±.020
(60.6±0.5)
0.183±.020
(4.65±0.5)
0.468±.020
(11.89±0.5)
123
M3 Threaded
Inserts
4 Places
See Notes
0.300 (7.62)
0.600 (15.24)
1.030 (26.16)
NOTES
1) Pins 1-3 & 5 are 0.040" (1.02 mm) diameter with 0.080"
(2.03 mm) diameter standoff shoulders.
2) Pins 4 & 6 are 0.062” (1.57 mm) diameter with 0.100"
(2.54 mm) diameter standoff shoulders.
3) Recommended pin length is 0.03" (0.76 mm) greater than the
PCB thickness.
4) All Pins: Material - Copper alloy
Finish - Matte tin over nickel plate
5) M3 screws used to bolt unit's baseplate to other surfaces such
as heatsink must not exceed 0.100" (2.54mm) depth below the
surface of the baseplate.
6) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
7) Baseplate flatness tolerance is 0.004" (.10 mm) TIR for surface.
8) All dimensions in inches (mm)
Tolerances: x.xx +/-0.02 in. (x.x +/-0.5 mm)
x.xxx +/-0.010 in. (x.xx +/-0.25 mm)
9) Weight: 3.53 oz (100 g) typical
10) Workmanship: Meets or exceeds current IPC-A-610 Class II
Pin
No.
1
2
3
4
5
6
PIN DESIGNATIONS
Name Function
Vin (+)
Com In
Vin (-)
Vout (-)
Com Out
Vout (+)
Positive input voltage
Common-mode input
Negative input voltage
Negative output voltage
Common-mode output
Positive output voltage
Product # IQ040PFQTC30
Phone [phone]
www.synqor.com
Doc.# 005-0005086 Rev. B
03/19/09
Page 3