PQ60260HTB10 Datasheet, PDF (2/13 Pages) SynQor Worldwide Headquarters – Half-brick DC/DC Converter

Technical Specification
MECHANICAL
DIAGRAM
0.700
(17.78)
0.400
(10.16)
Input: 35-75 V
Output: 26 V
Current: 9.6 A (250W)
Package: Half-brick
2.40
(61.0)
1.400
(35.56)
2.00
(50.8)
1.000
(25.40)
0.20
(5.1)
0.20
(5.1)
Side View
M3 Threaded
Standoff Ref.
.065 +.020/-.023
(1.65 +.51/-.58)
Bottom side
Clearance
0.12 typ.
(3.0)
See Note 4
0.50
(12.7)
1.90
(48.3)
2.30
(58.4)
0.19
(4.8)
Top View
1.90
(48.3)
0.400
(10.16)
0.800
(20.32)
0.600
(15.24)
0.50
(12.7)
1.000
(25.40)
1.400
(35.56)
M3 Threaded
Standoff
4 Places
See Note 5
Pin Farside
Typical
NOTES
1) Pins 1-4, 6-8, A, B are 0.040” (1.02mm) diameter with
0.080” (2.03mm) diameter standoff shoulders.
2) Pins 5 and 9 are 0.080” (2.03 mm) diameter with 0.125”
(3.18mm) diameter standoff shoulders.
3) Pins 3, A & B only included in Full-Feature models.
4) Pin length shown corresponds to pin with 0.145” extension.
Other pin extension lengths available.Recommended pin
length is 0.03” (0.76mm) greater than the PCB thickness.
5) Applied torque per screw should not exceed 3 in-lb (.33Nm)
6) Baseplate flatness tolerance is 0.004” (0.10mm) TIR for surface.
7) All Pins: Material - Copper Alloy
Finish (5/6 RoHS) - Tin/Lead over Nickel plate
Finish (6/6 RoHS) - Tin over Nickel plate
8) Undimensioned components are shown for visual reference only.
9) All dimensions in inches (mm)
Tolerances: x.xx+/-0.02 in. (x.x+/-0.5mm)
x.xxx+/-0.010 in. (x.xx+/-0.25mm)
10) Weight: 4.3 oz (122 g) typical
11) Workmanship: Meets or exceeds IPC-A-610C Class II
PIN DESIGNATIONS
Pin No. Name
Function
1
Vin(+)
Positive input voltage
2
ON/OFF TTL input to turn converter
on and off, referenced to
Vin(-), with internal pull up.
3
I share
Single wire parallel signal
4
Vin(-)
Negative input voltage
5
Vout(-)
Negative output voltage
6
SENSE(-) Return remote sense
7
TRIM
Output voltage trim
8
SENSE(+) Positive remote sense
9
Vout(+)
Positive output voltage
A
Clock Sync Clock synchronization
B
Start Sync Startup synchronization
Pins in Italics Shaded text are Optional
Product # PQ60260HTB10
Phone [phone]
www.synqor.com
Doc.# 005-2HTB26F Rev. H
10/10/08
Page 2