PQ60050SMX10 Datasheet, PDF (2/15 Pages) SynQor Worldwide Headquarters – Industry standard sixteenth-brick pin-out configuration

Technical
Specification
PQ60050SMx10
PQ60-SMA & SML Mechanical Drawing
.95 [24.1]
.600 [15.24]
.450 [11.43]
.300 [7.62]
.150 [3.81]
1.35
[34.3]
1.10
[27.9]
.100
[2.54]
8 7 65 4
OVERALL HEIGHT
Low Profile
.327 [8.31]
TOP VIEW
.145
[3.68]
SIDE VIEW
1
2
3
.18 [4.4]
.300 [7.62]
.600 [15.24]
BOTTOMSIDE CLEARANCE
Low Profile
.027 ±.015 [0.69 ±0.38]
NOTES
1) _{Pins 1-3, 5-7 are 0.040” (1.02mm) diameter, with 0.080”}
(2.03mm) diameter standoff shoulders.
2) _{Pins 4 and 8 are 0.062” (1.57 mm) diameter with 0.100" (2.54}
mm) diameter standoff shoulders.
3) _{Other pin extension lengths available. Recommended pin length is}
0.03” (0.76mm) greater than the PCB thickness.
4) _{All Pins: Material - Copper Alloy- Finish (RoHS 6/6) - Matte Tin}
over Nickel plate
5) _{Undimensioned components are shown for visual reference only.}
6) _{All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x}
+/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm)
7) _{Weight: .476oz (13.5g)}
8) _{Workmanship: Meets or exceeds IPC-A-610C Class II}
9) _{Open frame units have flanged pins are designed to permit surface}
mount soldering (avoid wave solder) using PiP technique.
PIN DESIGNATIONS
Pin Name Function
1 Vin(+) Positive input voltage
2
ON/OFF
TTL input to turn converter on and off, referenced to
Vin(–), with internal pull up.
3 Vin(–) Negative input voltage
4 Vout(–) Negative output voltage
5 SENSE(–) Negative remote sense(see note 1)
6
TRIM Output voltage trim (see note 2)
7 SENSE(+) Positive remote sense (see note 3)
8 Vout(+) Positive output voltage
Notes:
1)
SENSE(–) should be connected to Vout(–) either remotely or at
the converter.
2) Leave TRIM pin open for nominal output voltage.
3)
SENSE(+) should be connected to Vout(+) either remotely or at
the converter.
Product # PQ60050SMx10
Phone [phone]
www.synqor.com
Doc.# 005-0005169 Rev. D
06/28/11
Page 2