PQ60033EGX20 Datasheet, PDF (2/13 Pages) SynQor Worldwide Headquarters – Fixed frequency switching provides predictable EMI performance

Technical Specification
MECHANICAL DIAGRAM
Top View
0.600 (15.24)
0.450 (11.43)
0.300 (7.62)
0.150 (3.81)
0.90 (22.86)
87654
2.00
(50.8)
2.30
(58.42)
0.14
(3.56)
0.150
(3.81)
0.300 (7.62)
0.600 (15.24)
12 3
PIN FAR SIDE
TYPICAL
SEE NOTES
1, 2, & 3
Input: 35-75 V
Output: 3.3 V
Current: 20 A
Package: Eighth-brick
Side View
EGA max height
0.410 ± .014 (10.41)
See Note 9
0.145 (3.68)
See Note 3
EGL max height
340 ± 01. 4
(8.64 ±0.35)
0.110 (2.79)
See Note 3
EGA
Bottom side
min clearance
0.089±.013
(2.26)
See Note 9
EGL
Bottom side
min clearance
.019 ±.013
(0.48 ±0.33)
NOTES
1) Pins 1-3, 5-7 are 0.040” (1.02mm) diameter. with 0.080”
(2.03mm) diameter standoff shoulders.
2) Pins 4 and 8 are 0.062” (1.57 mm) diameter with 0.100”
(2.54 mm) diameter standoff shoulders.
3) Other pin extension lengths available. Recommended pin
length is 0.03” (0.76mm) greater than the PCB thickness.
4) All Pins: Material: Copper Alloy

Finish (RoHS 6/6) - Matte Tin over Nickel plate
5) Undimensioned components are shown for visual reference only.
6) All dimensions in inches (mm)
Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm)
x.xxx +/-0.010 in. (x.xx +/-0.25mm)
7) Weight: 0.68 oz. (19 g) typical
8) Workmanship: Meets or exceeds IPC-A-610C Class II
9) Modules can be ordered as EGA option that have different
pins to provide a minimum bottom side clearance of 0.076”
while increasing maximum height to 0.424”. See ordering
page for more information.
10) The flanged pins are designed to permit surface mount
soldering (allowing to avoid the wave soldering process)
through the use of the flanged pin-in-paste technique.
PIN DESIGNATIONS
Pin No. Name
Function
1
Vin(+)
Positive input voltage
2
ON/OFF


TTL input to turn converter
on and off, referenced to
Vin(-), with internal pull up.
3
Vin(-)
Negative input voltage
4
Vout(-)
Negative output voltage
5
SENSE(-) Negative remote sense¹
6
TRIM
Output voltage trim²
7
SENSE(+) Positive remote sense³
8
Vout(+)
Positive output voltage
Notes:
1. SENSE(–) should be connected to Vout(–) either remotely or at the converter.
2. Leave TRIM pin open for nominal output voltage.
3. SENSE(+) should be connected to Vout(+) either remotely or at the converter.)
Product # PQ60033EGx20
Phone [phone]
www.synqor.com
Doc.# 005-0005349 Rev. A
09/23/09
Page 2