AQ0500IUXT Datasheet, PDF (2/12 Pages) SynQor Worldwide Headquarters – Integral fan cooling with speed control

Technical Specification
AC Input: 85-264 Vrms
DC Output: 12/24/36/48 V Semi-reg.
Power: 500 W
Grade: Industrial
ACuQor 500W Triple Vout Series Electrical Characteristics
All specifications typical with T_A = 25 °C, unless otherwise specified. Specifications subject to change without notice.
MAIN OUTPUT SPECIFICATIONS
Output power (continuous) 85-132/170-264 Vrms
(5 s transient)
85-132/170-264 Vrms
132-170 Vrms
500 W (Note 1)
700 W (Note 1)
See Figures 11, 12
GENERAL SPECIFICATIONS
Fundamental ripple freq. Input
Output
Audible noise
Fan speed varies with temp.
500 kHz
250 kHz
39 dBA @ 1 m max.
Nominal DC output
voltage (at 250W)
(Semi-regulated)
Efficiency
(see figs. 1, 3, 5, 7)
(see Note 1)
Hold-up time (to -20%)
(see Note 1)
12 Vout (model 1T)
24 Vout (model 2T)
36 Vout (model 3T)
48 Vout (model 4T)
12 Vout, 115 Vrms, 500 W
48 Vout, 115 Vrms, 500 W
12 Vout, 230 Vrms, 500 W
48 Vout, 230 Vrms, 500 W
12 Vout
24 / 36 / 48 Vout
12.4 V
25 V
37.5 V
50 V
86% typ.
89% typ.
88% typ.
90% typ.
12 ms @ 500 W
16 ms @ 500 W
Weight
(EC)
(RC)
(TC)
MTBF
MIL-217
Demonstrated
ISOLATION SPECIFICATIONS
Isolation voltage
Input to output
Input to ground
Output to ground
540 g (19.1 oz)
1068 g (37.7 oz)
1582 g (55.8 oz)
343.6 kHours
TBD kHours
3000 Vrms
1500 Vrms
500 Vrms
Maximum load capacitance 12 Vout
24 Vout
36 Vout
48 Vout
Output ripple voltage
Switching frequency (20 MHz BW)
Twice line frequency (at 300 W)
16,000 µF
8,000 µF
4,000 µF
2,000 µF
0.5% p-p
5.0% p-p
Insulation resistance
Leakage currents
Output to ground
ENVIRONMENTAL CHARACTERISTICS
Thermal performance
Operating ambient (see Figure 2)
Non-operating ambient
Relative humidity
Non-condensing
10 MΩ min.
See Note 2
-40 ºC to +70 ºC
-40 ºC to +85 ºC
5-95% RH
Turn-on delay
Transient response
Overvoltage protection
Iout steps from 50-75%
At 0.2 A/µs
Cyclic restart
Short circuit protection Cyclic operation
Total regulation
Over line, load and temperature
12V_STANDBY cross-reg. ΔVout caused by 50 W step
5V_STANDBY cross-reg. ΔVout caused by 10 W step
Thermal protection
Automatic recovery
REMOTE_ENABLE
Input Low Voltage
Input High Voltage
12V_STANDBY OUTPUT SPECIFICATIONS
Output power
85-264 Vrms
2 s max.
3% typ / 6% max. dev.
100 ms recovery
110-120%
115% rated Iout
±6.0%
0.5%
0.1%
+125 ºC (PCB Temp)
0.45 V (max)
4.15 V (min)
Altitude
Random vibration
Shock
Operating
Non-operating
5-500 Hz
Half-sine, 10 ms, 3 axes
EMC CHARACTERISTICS
Conducted emissions
EN55011 and EN55022, FCC
part15
Line frequency harmonics EN61000-3-2
Voltage fluctuations
EN61000-3-3
ESD air
EN61000-4-2
ESD contact
EN61000-4-2
Radiated immunity
EN61000-4-3
50 W Fast transients
EN61000-4-4
10,000 ft max.
30,000 ft max.
0.03 g2/Hz
20 g peak
Level B
Class A
Clause 5b
Level 3
Level 3
Level 3
Level 3
Nominal DC output voltage Semi-regulated
12.4 V Line surge immunity
EN61000-4-5
Level 3
Total regulation
Over line, load and temperature
±6.0% Conducted immunity
EN61000-4-6
Level 3
Main output cross-reg.
Output ripple
Δ12V_STANDBY caused by Δ350W
on main output
Switching frequency (20 MHz BW)
Twice line frequency
Output current
Continuous
Short circuit protection Cyclic operation
Maximum load capacitance
400 mV Power freq. mag. field
EN61000-4-8
3 A/m
10 mV
0.45 Vrms
4.2 A
5.0 A
2,000 uF
Voltage dip immunity
EN61000-4-11
Perf Criteria A, A, B
<5% UT 10 ms,
70% UT 500 ms,
40% UT 100 ms
NOTES:
1.Main output power rating always includes 5 V and 12 V standby outputs.
2. Leakage currents see page 5.
5V_STANDBY OUTPUT SPECIFICATIONS
Output power
85-264 Vrms
10 W
Nominal DC output voltage Fully regulated
5.0 V
Total regulation
Over line, load and temperature
±5.0%
Output current
Continuous
2.0 A
Short circuit protection Cyclic operation
2.5 A
Maximum load capacitance
1,000 uF
INPUT SPECIFICATIONS
AC input voltage
Universal range
Input frequency
Input current
(see Note 1)
Power factor
115 Vrms @ 500 W
230 Vrms @ 500 W
Input surge current
264 Vrms (cold start)
Internal input fuses
Both AC lines
85-264 Vrms
47-63 Hz
5 Arms
2.5 Arms
>0.98
40 A max.
10.0 A
Product # AQ0500IUxT
Phone [phone]
www.SynQor.com
Doc.# 005-005055 Rev. D
08/24/15
Page 2