PQ60033EML15 Datasheet, PDF (13/13 Pages) SynQor Worldwide Headquarters – Eighth-brick DC/DC Converter

Technical Specification
Input: 35-75 V
Output: 3.3 V
Current: 15 A
Package: Eighth-brick
PART NUMBERING SYSTEM
The part numbering system for SynQor’s PowerQor DC/DC
converters follows the format shown in the example below.
PQ 60 033 E M L 15 N N S
Options (see
Ordering Information)
Output Current
Thermal Design/Profile
Performance Level
Package Size
Output Voltage
Input Voltage
Product Family
The first 12 characters comprise the base part number and the
last 3 characters indicate available options. Although there
are no default values for enable logic and pin length, the most
common options are negative logic and 0.145” pins. These
part numbers are more likely to be readily available in stock
for evaluation and prototype quantities. A “-G” suffix indi-
cates 6/6 RoHS compliance.
Application Notes
A variety of application notes and technical white papers can
be downloaded in pdf format from our website.
PATENTS (additional patent applications may be filed)
SynQor holds the following patents, one or more of which
might apply to this product:
5,999,417
6,594,159
6,927,987
6,222,742
6,731,520
7,050,309
6,545,890
6,894,468
7,072,190
6,577,109
6,896,526
7,085,146
ORDERING INFORMATION
The tables below show the valid model numbers and ordering
options for converters in this product family. When ordering
SynQor converters, please ensure that you use the complete
15 character part number consisting of the 12 character base
part number and the additional 3 characters for options. To
order 6/6 RoHS compliant product please add a “-G” suffix.
Model Number
PQ60010EMw 15xyz
PQ60012EMw 15xyz
PQ60015EMw 15xyz
PQ60018EMw 15xyz
PQ60025EMw 15xyz
PQ60033EMw 15xyz
PQ60050EMw 10xyz
PQ60120EMw 04xyz
Input Voltage ^{Output Max Output}
Voltage Current
35 - 75 V 1.0 V
15 A
35 - 75 V 1.2 V
15 A
35 - 75 V 1.5 V
15 A
35 - 75 V 1.8 V
15 A
35 - 75 V 2.5 V
15 A
35 - 75 V 3.3 V
15 A
35 - 75 V 5.0 V
10 A
35 - 75 V 12 V
4.2 A
Modules above can be ordered with an increased bottom side
board clearance and a slightly larger total height (see page 2
for dimensions). To order replace EML in the part number with
EMA. There are no other differences from the EML units.
The following option choices must be included in place of the
x y z spaces in the model numbers listed above.
Options Description: w x y z
Thermal
Enable
Pin
Feature
Design
Logic
Length
Set
K - 0.110"
A - Open Frame
P - Positive N - 0.145" S - Standard
L - Low Profile Open Frame N - Negative R - 0.180" A - Tight Accuracy
Y - 0.250"
Contact SynQor for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
978-849-0600
888-567-9596
978-849-0602
[e-mail]
www.synqor.com
155 Swanson Road
Boxborough, MA 01719
USA
Warranty
SynQor offers a three (3) year limited warranty. Complete warranty
information is listed on our website or is available upon request from
SynQor.
Information furnished by SynQor is believed to be accurate and reliable.
However, no responsibility is assumed by SynQor for its use, nor for any
infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any
patent or patent rights of SynQor.
Product # PQ60033EML15
Phone [phone]
www.synqor.com
Doc.# 005-2EM633E Rev. D
7/17/07
Page 13