MCOTS-C-28-05-HP Datasheet, PDF (12/13 Pages) SynQor Worldwide Headquarters – MILITARY COTS DC/DC CONVERTER

Technical Specification
Mechanical Drawing
MCOTS-C-28-05-HP
Output: _5V
Current: _40A
2.00 [ 50,8 ]
1.400 [ 35,56 ]
1.000 [ 25,4 ]
.700 [ 17,78 ]
.400 [ 10,16 ]
2.386 ±.020
[ 60,6 ±0,5 ]
1.90
[ 48,3 ]
.233 ±.020
[ 5,92 ±0,5 ]
2.486 ±.020 [ 63,14 ±0,5 ]
8 765
4
TOP VIEW
.243 ±.020
[ 6,17 ±0,5 ]
.243 ±.020
[ 6,17 ±0,5 ]
1.90
[ 48,3 ]
.512
+.002
-.005
[ ] ¹³
+0,05
-0,12
OVERALL
HEIGHT
12
3
.163
[ 4,14 ]
SIDE VIEW
.543 ±.020 [ 13,79 ±0,5 ]
.400 [ 10,16 ]
1.400 [ 35,56 ]
THRU HOLE
M3 (SEE NOTE 8)
STANDOFFS (4)
.027
+.007
-.010
[ ] ^0,69
+0,17
-0,25
BOTTOMSIDE CLEARANCE
NOTES
1) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
2) Baseplate flatness tolerance is 0.004" (.10 mm) TIR for surface.
3) Pins 1-3, 5-7 are 0.040” (1.02mm) diameter, with 0.080”
(2.03mm) diameter standoff shoulders.
4) Pins 4 and 8 are 0.080” (2.03 mm) dia. with 0.125” (3.18 mm) dia.
standoff shoulders
5) All Pins: Material: Copper Alloy
Finish: Matte Tin over Nickel plate
6) Undimensioned Components are shown for visual reference only
7) Weight: 4.9oz (142g)
8) Threaded or Non-Threaded options available
9) All dimensions in inches (mm) Tolerances:
x.xx +/-0.02 in. (x.x +/-0.5mm)
x.xxx +/-0.010 in. (x.xx +/-0.25mm)
PIN DESIGNATIONS
Pin Name Function
1 Vin(+) Positive input voltage
TTL input to turn converter on
2 ON/OFF and off, referenced to Vin(–), with
internal pull up.
3 Vin(–) Negative input voltage
4 Vout(–) Negative output voltage
5 SENSE(–) Negative remote sense1
6 TRIM Output voltage trim2
7 SENSE(+) Positive remote sense3
8 Vout(+) Positive output voltage
Notes:
1) SENSE(–) should be connected to Vout(–) either
remotely or at the converter.
2) Leave TRIM pin open for nominal output voltage.
3) SENSE(+) should be connected to Vout(+)
either remotely or at the converter.
Product # MCOTS-C-28-05-HP Phone [phone]
www.synqor.com
Doc.# 005-0005278 Rev. 1
06/16/09
Page 12