MQHE-28E-P Datasheet, PDF (11/17 Pages) SynQor Worldwide Headquarters – 10 amps output current

Technical Specification
MQHE-28E-P
Current: 10A
MIL-STD-810F Qualification Testing
MIL-STD-810F Test
Method
Description
Fungus
508.5
Table 508.5-I
Altitude
500.4 - Procedure I Storage: 70,000 ft / 2 hr duration
500.4 - Procedure II Operating: 70,000 ft / 2 hr duration; Ambient Temperature
Rapid Decompression 500.4 - Procedure III Storage: 8,000 ft to 40,000 ft
Acceleration
513.5 - Procedure II Operating: 15 g
Salt Fog
509.4
Storage
High Temperature
501.4 - Procedure I Storage: 135 °C / 3 hrs
501.4 - Procedure II Operating: 100 °C / 3 hrs
Low Temperature
502.4 - Procedure I Storage: -65 °C / 4 hrs
502.4 - Procedure II Operating: -55 °C / 3 hrs
Temperature Shock 503.4 - Procedure I - C Storage: -65 °C to 135 °C; 12 cycles
Rain
506.4 - Procedure I Wind Blown Rain
Immersion
512.4 - Procedure I Non-Operating
Humidity
Random Vibration
Shock
507.4 - Procedure II
514.5 - Procedure I
516.5 - Procedure I
516.5 - Procedure VI
Aggravated cycle @ 95% RH (Figure 507.5-7 aggravated temp -
humidity cycle, 15 cycles)
10 - 2000 Hz, PSD level of 1.5 g2/Hz (54.6 grms), duration = 1 hr/axis
20 g peak, 11 ms, Functional Shock (Operating no load) (saw tooth)
Bench Handling Shock
Rotary wing aircraft - helicopter, 4 hrs/axis, 20 g (sine sweep from
Sinusoidal vibration 514.5 - Category 14
10 - 500 Hz)
Sand and Dust
510.4 - Procedure I Blowing Dust
510.4 - Procedure II Blowing Sand
Product # MQHE-28E-P
Phone [phone]
www.synqor.com
Doc.# 005-0005151 Rev. G 05/27/16
Page 11