PQ48053HTA30 Datasheet, PDF (1/11 Pages) SynQor Worldwide Headquarters – 30 Amp, No Heatsink, Isolated DC/DC Converter

Technical Specification
Half
Brick
48Vin 5.3Vout 30A
30 Amp, No Heatsink, Isolated DC/DC Converter
The PQ48053HTA30 PowerQor™ Tera converter is a
next-generation, board-mountable, isolated,fixed switch-
ing frequency DC/DC converter that uses synchronous
rectification to achieve extremely high conversion effi-
ciency. The power dissipated by the converter is so low
that a heatsink is not required, which saves cost, weight,
height, and application effort. The Tera series convert-
ers offer the maximum useable output current for any
standard “half-brick” module.
Operational Features
• Ultra-high efficiency, 92% at full rated load current
• Delivers up to 30 amps of output current with mini-
mal derating - no heatsink required
• Wide input voltage range: 39V – 75V
• Fixed frequency switching provides predictable EMI
performance
Mechanical Features
• Industry standard pin-out configuration
• Industry standard size: 2.3” x 2.4”
• Total height only 0.44”, permits better airflow and
smaller card pitch
• Total weight: 2.6 oz. (75 grams)
Safety Features
• 2000V, 10 MΩ input-to-output isolation
• UL/cUL 60950 recognized (US & Canada), basic
insulation rating
• TUV certified to EN60950
• Meets 72/23/EEC and 93/68/EEC directives
• Meets UL94V-0 flammability requirements
Product # PQ48053HTA30
Phone [phone]
PQ48053HTA30 Module
Protection Features
• Input under-voltage lockout and over-voltage
shutdown protects against abnormal input voltages
• Output current limit and short circuit protection
• Output over-voltage protection
• Thermal shutdown
Control Features
• On/Off control referenced to input side (negative
logic)
• Remote sense for the output voltage compensates
for output distribution drops
• Output voltage trim permits custom voltages and
voltage margining
Doc.# 005-2HT453F Rev. A
5/2/03
Page 1