|
MPFIC-U-24-HT Datasheet, PDF (1/16 Pages) – | |||
|
MPFIC-U-24-HT
Isolated PFC Module
Half-brick
Military Isolated Power Factor Correction Module
85-264Vrms 47 - 63Hz / 360 - 800Hz 24Vdc
13.5A
â¥0.99 90%@115Vrms / 92%@230Vrms
Input Voltage
Input Frequency
Output Voltage Output Current Power Factor
Full Load Efficiency
The MPFICQor Military Isolated PFC Module is a
high power, high efficiency AC-DC converter. It
operates from a universal AC input and generates
an isolated output. Both regulated and semi-
regulated (droop version) modules are available.
Used in conjunction with a hold-up capacitor, and
SynQorâs MCOTS AC line filter, the MPFICQor will
draw a nearly perfect sinusoidal current (PF>0.99)
from a single phase AC input. The module is
supplied completely encased to provide protection
from the harsh environments seen in many military
and aerospace environments.
MMP4IFL87II5CT-A--62UR36-Y2H4I4zVS-r/OHmLT3s-A6N2T0-E4M-DV8dP0cF01CH3z.5A
Operational Features
⢠Isolated output, 325W output power
⢠Universal input frequency range: 47 - 63Hz / 360 - 800Hz
⢠Input voltage range: 85-264Vrms
⢠â¥0.99 Power Factor
⢠High efficiency: 92% (230Vrms)
⢠Internal inrush current limit
⢠Auxiliary 10V bias supply, primary-side referenced
⢠Can be paralleled (droop version only)
⢠Compatible with SynQorâs MCOTS AC line filters
Mechanical Features
Designed and manufactured in the USA
Control Features
⢠PFC Enable
⢠AC Power Good Signal
⢠DC Power Good Signal
Protection Features
⢠Input current limit and auto-recovery short circuit protection
⢠Auto-recovery input under/over-voltage protection
⢠Auto-recovery over-voltage protection
⢠Auto-recovery thermal shutdown
⢠Industry standard half-brick package
⢠Size: 2.386â x 2.486â x 0.512â (60.6 x 63.1 x 13.0 mm)
⢠Total weight: 4.7 oz (134 g)
⢠Flanged baseplate version available
Safety Features
(Pending)
⢠Input to output reinforced isolation 4250Vdc
⢠Input/Output to baseplate isolation 2150Vdc
⢠UL 60950-1/R:2011-12
⢠CAN/CSA-C22.2 No. 60950-1/A1:2011
⢠EN60950-1/A2:2013
⢠CE Marked
Product MPFIC-U-24-HT
Phone 1-888-567-9596
Compliance Features
Designed to meet these standards when used with
SynQor MACF Filters.
⢠MIL-STD-461(A-F)
⢠MIL-STD-1399
⢠MIL-STD-704-2, -704-4, & -704-6* (see 704 app section)
Contents
Page No.
Typical Application............................................................................2
Technical Specification......................................................................3
Standards & Qualification Testing.......................................................7
Application Section...........................................................................8
Encased Mechanical........................................................................14
Encased Mechanical with Flange......................................................15
Ordering Information......................................................................16
www.synqor.com
Doc.# 005-0006858 Rev. 1
05/25/2016
Page 1
|
▷ |