MPFC-U-390-QP Datasheet, PDF (1/16 Pages) SynQor Worldwide Headquarters – Auxiliary 10V bias supply

MPFC-U-390-QP
Power Factor Correction
Quarter-brick
Military Power Factor Correction Module
85-264Vrms
Input Voltage
47 - 63Hz / 360 - 800Hz 390Vdc
Input Frequency
Output Voltage
350W
Output Power
≥0.99
Power Factor
Up to 96%
Full Load Efficiency
The MPFCQor Military Power Factor Correction
module is an essential building block of an AC-DC
power supply. Used in conjunction with a hold-up
capacitor, SynQor’s MCOTS DC-DC converters and
SynQor’s MCOTS AC line filter, the MPFCQor will
draw a nearly perfect sinusoidal current (PF>0.99)
from a single phase AC input. The module is
supplied completely encased to provide protection
from the harsh environments seen in many military
and aerospace environments.
M_M^P_4IL^F_87I^C_5T-A-^-₆₂^U_R36Y^-_H4³_PzV⁹_Or/⁰_mW3^-_s^Q_E63R^P₀₉^-F-^N_0A8^-CV0M_{dT0OcHR3z5C0OWRRECTION}
Operational Features
• Input voltage range: 85-264Vrms
• Universal input frequency range: 47 - 63Hz / 360 - 800Hz
• 350W output power
• ≥0.99 Power Factor
• High efficiency: >95% (230Vrms)
• Internal inrush current limit
• Auxiliary 10V bias supply
• Compatible with SynQor’s MCOTS DC-DC converters
and SynQor’s MCOTS AC line filters
Mechanical Features
• Industry standard quarter-brick pin-out
• Size: 1.54” x 2.39” x 0.50” (39.0 x 60.6 x 12.7 mm)
• Total weight: 3.07 oz. (87 g)
• Flanged baseplate version available
Control Features
• PFC Enable
• Load Enable (also: Power Out Good signal)
Protection Features
• Input current limit and auto-recovery short circuit protection
• Auto-recovery input under/over-voltage protection
• Auto-recovery output over-voltage protection
• Auto-recovery thermal shutdown
Compliance Features
Designed to meet these standards when used with
SynQor MACF Filters & MCOTS DC-DC Converters.
• MIL-STD-461(A-F)
• MIL-STD-1399
• MIL-STD-704-2, -704-4, & -704-6* (see 704 app section)
Safety Features
• Input/Output to baseplate isolation 2150Vdc
• UL 60950-1/R:2011-12
• CAN/CSA-C22.2 No. 60950-1/A1:2011
• EN60950-1/A2:2013
• CE Marked
Contents
Page No.
Typical Application............................................................................2
Technical Specification......................................................................3
Technical Diagrams...........................................................................5
Screening & Qualification Testing.......................................................7
Application Section...........................................................................8
Encased Mechanical........................................................................14
Encased Mechanical with Flange......................................................15
Ordering Information......................................................................16
Product MPFC-U-390-QP
Phone [phone]
www.synqor.com
Doc.# 005-0006726 Rev. B 03/30/2016
Page 1