MPFC-115-3P-270-FP Datasheet, PDF (1/21 Pages) SynQor Worldwide Headquarters – Auto-recovery thermal shutdown

MPFC-115-3PH-270-FP
Power Factor Correction
Full-brick
Military Grade
3-Phase Power Factor Correction Module
115 Vrms L-N 45 Hz to 800 Hz 270 Vdc
1.5 kW
100 °C
Input Voltage Input Frequency Output Voltage Output Power Baseplate Temp
1.5%
THD
94%
Full Load Efficiency
The MilCOTS 3-phase MPFCQor Power Factor
Correction module is an essential building
block of an AC-DC power supply. Used in
conjunction with SynQor’s MACF-115-3PH-
UNV-HT AC line filter and a limited amount of
stabilizing capacitance, the 3-Phase MPFCQor
will draw well-balanced and low-distortion
sinusoidal currents from each phase of a
3-phase AC input. It is designed to comply
with a wide range of military standards and is
manufactured in the United States.
MAPCAF-CDCDSC-IC1N/DO1CPN/U5UOCS-TTN3P13:PVU635EH8T-1RP-:252Th20-7Ea678R0s003-e0F1V8PdC5-cAN-G61-M4EA0C1VO.5rDmkEsW1(WL-XN1)045-800 ^Hz
Operational Features
• Full-brick form factor
• 1.5 kW continuous rating at 100 °C baseplate temperature
• Semi-regulated output: 270 Vdc
• Compatible with Military Standard 60 Hz, 400 Hz and var. freq. systems
• Meets military standards for harmonic content
• Enables systems with repetitive load transients to pass MIL-STD-461
CE101 requirement by offering superior load current rejection
• Minimal inrush current
• Balanced phase currents
• High power factor (0.98 at 400 Hz / 1.5 kW)
• Minimal external output capacitance needed
• Supports full load current during startup ramp
• Additional half-brick input filter available to meet full EMI
• Compatible with SynQor MCOTS - 270 / Bus Converters
Compliance Features
3-phase PFCQor series converters are designed to meet:
(With an MCOTS 3-phase AC input filter)
• MIL-STD-704 (A-F) w/ leading power factor
• MIL-STD-461 (C, D, E, F)
• MIL-STD-1399 (at 200 Vrms L-L)
• MIL-STD-810G
Mechanical Features
• Industry standard Full-brick-size
• Size: 2.486” x 4.686” x 0.512” (63.14 x 119.02 x 13.0 mm)
• Weight: 11.3 oz (320 g)
Designed and manufactured in the USA
Control Features
• All control pins referenced to separate floating return
• Asynchronous serial data interface
• AC and DC Power Good outputs
• PFC Enable and Battle Short inputs
• 3.3 V always-on standby power output
• Clock synchronization output
Protection Features
• Output current limit and auto-recovery short circuit protection
• Auto-recovery input under/over-voltage protection
• Auto-recovery output over-voltage protection
• Auto-recovery thermal shutdown
Contents Features
Page No.
Typical Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Technical Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Mil-STD-810G Qualification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Application Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Encased Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Product # MPFC-115-3P-270-FP
Phone [phone]
www.synqor.com
Doc.# 005-0006513 Rev. B 07/22/2016
Page 1