MCOTS-F-28E-P-DM Datasheet, PDF (1/9 Pages) SynQor Worldwide Headquarters – Very low DC resistance

MCOTS-F-28E-P-DM
Passive Filter
Demi-Brick
-70V to +70V
Continuous Input
MILITARY COTS EMI FILTER
10A
60mΩ @ 100°C
>80dB @ 500kHz
Output Current
Max. DC Resistance
Differential Attenuation
FULL POWER OPERATION: -55ºC to +100ºC
The Mil-COTS series of EMI filters brings SynQor’s field
proven technology and manufacturing expertise to the
industrial power application marketplace. SynQor’s
innovative packaging approach ensures survivability
in the most hostile environments. These filters have
high differential-mode and common-mode attenuation,
low DC resistance, and a stabilizing bulk capacitor
resistor. They follow conservative component derating
guidelines and they are designed and manufactured to
the highest standards.
ME-CM7O0IVTFSIt-LoFT+-E27R80EV-iPn-D1M0Aout
Operational Features
• 10A output current
• Very low DC resistance
• >80 dB differential-mode attenuation at 500kHz
• >60dB common-mode attenuation at 500kHz
• Stabilizing bulk capacitor and damping resistor included
• All capacitors are X7R multi-layer ceramic
• Designed to meet all MIL-STD 461 EMI requirements
(D,E,F)
Mechanical Features
• Size: 1.55" x 1.52" x 0.50" (39.4 x 38.6 x12.7 mm)
• Total weight: 1.97 oz (56g)
• Flanged baseplate version available
Safety Features
• 1000V input/output to case isolation
• Certified 60950-1 requirement for basic insulation
(Pending see Standards and Qualifications page)
Designed and Manufactured in the USA
In-Line Manufacturing Process
• AS9100 and ISO 9001:2008 Certified Facility
• Full component traceability
Screening Qualifications
• Qualification consistent with MIL-STD-810
• Available with S-Grade or M-Grade screening
• Pre-cap inspection per IPC-610, Class III
• Temperature cycling per MIL-STD-883, Method 1010,
Condition B, 10 cycles
• Burn-In at 100°C baseplate temperature
• Final visual inspection per MIL-STD-2008
Product # MCOTS-F-28E-P-DM
Phone [phone]
Doc.# 005-0006590
Rev. A
09/10/14
Page 1