MCOTS-C-28-48-QT Datasheet, PDF (1/13 Pages) SynQor Worldwide Headquarters – MILITARY COTS DC/DC CONVERTER

MCOTS-C-28-48-QT
Single Output
Quarter Brick
MILITARY COTS DC/DC CONVERTER
16-40V
Continuous Input
16-50V
Transient Input
48V
Output
2.5A
Output
91% @ 1.25A / 89% @ 2.5A
Efficiency
Full Power Operation: -55°C to +100°C
The MilQor series of MIL-COTS DC/DC converters brings
SynQor’s field proven high-efficiency synchronous
Mil-COTS
rectification technology to the Military/Aerospace
industry. SynQor’s ruggedized encased packaging
approach ensures survivability in demanding
environments. Compatible with the industry standard
format, these converters operate at a fixed frequency,
and follow conservative component derating guidelines.
They are designed and manufactured to comply with a
wide range of military standards
Operational Features
Designed and Manufactured in the USA
• High efficiency, 89% at full rated load current
• Operating input voltage range: 16-40 V
• Fixed frequency switching provides predictable EMI
• No minimum load requirement
Mechanical Features
• Industry standard quarter-brick pin-out configuration
• Size: 1.54" x 2.39" x 0.50"
(39.0 x 60.6 x 12.7mm)
• Total weight: 3 oz (85 g)
Protection Features
• Input under-voltage lockout
• Output current limit and short circuit protection
• Active back bias limit
• Output over-voltage protection
• Thermal shutdown
Control Features
• On/Off control referenced to input side
• Remote sense for the output voltage
• Output voltage trim range of -20%, +10%
Safety Features
• 2250 V, 30 MW input-to-output isolation
• Certified 60950-1 requirements for basic insulation
(see Standards and Qualifications page)
• CE Marked
• RoHS compliant
Screening/Qualification
• AS9100 and ISO 9100:2000 certified facility
• Qualification consistent with MIL-STD-883
• Avialable with standard or military grade screening
• Pre-cap inspection per IPC-610, Class III
• Temperature cycling per MIL-STD-883, Method 1010,
Condition B, 10 cycles
• Burn-In at 100°C baseplate temperature
• Final visual inspection per MIL-STD-2008
• Full component traceability
Product # MCOTS-C-28-48-QT Phone [phone]
www.synqor.com
Doc.# 005-0005282 Rev. 1
06/16/09
Page 1